Imaging through scattering media is a useful and yet demanding task since it involves solving for an inverse mapping from speckle images to object images. It becomes even more challenging when the scattering medium undergoes dynamic changes. Various approaches have been proposed in recent years. However, none of them are able to preserve high image quality without either assuming a finite number of sources for dynamic changes, assuming a thin scattering medium, or requiring access to both ends of the medium. In this paper, we propose an adaptive inverse mapping (AIP) method, which requires no prior knowledge of the dynamic change and only needs output speckle images after initialization. We show that the inverse mapping can be corrected through unsupervised learning if the output speckle images are followed closely. We test the AIP method on two numerical simulations: a dynamic scattering system formulated as an evolving transmission matrix and a telescope with a changing random phase mask at a defocused plane. Then we experimentally apply the AIP method to a multimode-fiber-based imaging system with a changing fiber configuration. Increased robustness in imaging is observed in all three cases. AIP method’s high imaging performance demonstrates great potential in imaging through dynamic scattering media.
Recognizing objects directly from optical fiber output images is useful in endoscopic applications when forming a clear image of the object is unnecessary or rather difficult. Conventional fiber-optic systems, such as multicore-fiber-based and multimode-fiber-based systems, suffer from the sensitivity of the fiber to external perturbations. For example, a slight movement of the fiber (a-few-millimeters translation of the tip for meter-long multicore fibers or multimode fibers) can greatly change the output images of the system. In this work, we utilize the light guidance stability of recently proposed glass-air Anderson localizing optical fiber (GALOF) to achieve robust imaging-free objection recognition. We transport five classes of cell images through an 80-cm straight GALOF. A deep convolutional neural network is trained to classify the output images and tested on images never seen, namely, images collected when the fiber is bent or when the fiber facet is placed several millimeters away from the object without any distal optics. Bending-invariant high classification accuracy (86.8% on average) is observed all the way to the maximum bending offset distance of 45 cm (~74 bending angle). High classification accuracy (91.2%) is also preserved when the fiber facet is 0.5 mm away from the object.
13 February 2023 in Journal of Lightwave Technology
Recent years have witnessed much progress in the development of fiber lasers in the 2 μm region. Yet, to date, their power levels are limited by modulation instability and soliton formation attributed to the strong anomalous dispersions of fused silica in this wavelength region. Further power scaling requires a novel design of an all-solid silica active fiber that features normal dispersion by compensating the material dispersion with the waveguide dispersion. At the same time, a large mode area, low losses, single mode operation and robustness need to be maintained. In this paper, we propose an all-solid anti-resonant fiber (AS-ARF) design that meets these demands. We demonstrate that normal dispersion can be achieved in AS-ARFs at 2 μm by exploiting the Kramers-Kronig relation. To balance the desired dispersion with the other performance parameters, we optimize the design of the AS-ARFs using a genetic algorithm. The optimized AS-ARF has a mode field area of 1170 μm 2 and normal dispersion over the spectrum from 1.96 μm to 2.04 μm. Within this spectrum, the maximum confinement loss (CL) of the fundamental mode (FM) is 16 dB/km and the minimum CL of the higher order modes (HOMs) is over 100 dB/km. The HOMs can be easily coupled out by bending the fiber while the FM stays in the core. For example, the CLs are over 2×10 4 dB/km for the HOMs and below 200 dB/km for the FM at 2 μm at a bending radius of 20 cm. Moreover, the properties of the proposed AS-ARF remain favorable even under large geometric variations, showing good tolerance to manufacturing errors. We expect the proposed AS-ARF to further stimulate the development of high-power fiber lasers in the 2 μm region.
23 December 2022 in Journal of Lightwave Technology
In this paper, we discuss chromatic dispersion properties of transverse Anderson localization optical fiber (TALOF) and their implications on broad band supercontinuum (SC) generation. Our dispersion study reveals a clear correlation between the Anderson localization length and the dispersion properties of highly localized TALOF modes. We demonstrate that the zero dispersion wavelength can be tuned over more than 300 nm within the same fiber by selected excitation of specific modes. We exploit this unique TALOF property, which we validated with rigorous finite-element modeling, to generate multi octave spanning SC ranging from 460–1750 nm, highlighting the great potential of disordered Anderson localization fibers for nonlinear applications.