13 May 2021 in IEEE Transactions on Industrial Electronics
Multiple-port dc–dc converters are characterized by a variety of kinds and a large number of circuit topologies. In this article, we aim to reveal the intrinsic relationship among the topologies of multiple-port dc–dc converters and propose the topology derivation method. First, the voltage- and current-type ports are summarized from basic dc–dc converters, and the approach of converting current-type ports into voltage-type ports is discussed. Then, according to Kirchhoff's law, four types of multiple-input multiple-output converters named input-port-series output-port-series, input-port-series output-port-parallel, input-port-parallel output-port-series, and input-port-parallel output-port-parallel are presented. Second, the topology derivation method of multiple-port bidirectional dc–dc converters based on the voltage-type ports is studied in terms of power flow paths in various operation modes, and then the topology optimization method is proposed. Particularly, a flow diagram for the optimal design procedure is given to guide the topology derivation for some specific requirements. Based on the proposed approach, a family of multiple-port dc–dc converters can be derived, which provides lots of viable candidates for practical engineering. Furthermore, one derived converter named the parallel-type three-port bidirectional buck converter is analyzed in three operation modes to demonstrate the topology derivation. Finally, the effectiveness of the above theoretical analysis is verified by those experimental results.
27 January 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Compared with single-input single-output (SISO) dc–dc converters, salient characteristics, such as variable topology sequences and stronger nonlinearity of single-inductor multiple-output (SIMO) dc–dc converters become the major challenges for the modeling and analysis. In this article, a multiple-harmonic model of single-inductor dual-output (SIDO) Buck dc–dc converters is proposed to investigate the multiple-harmonic oscillation phenomenon and analyze the harmonics in different frequency regions. Based on the proposed model, multiple-harmonic oscillation behaviors with the variations of load resistances are revealed, and these harmonics, including low- and high-frequency harmonics, are assessed. Particularly, according to the principle of parity decomposition, the odd and even component distribution of each harmonic is obtained, and a harmonic interaction index is defined to estimate the degree of asymmetric waveform distortion in two adjacent half-waves. Furthermore, eigenvalue analysis is employed to reveal the occurrence mechanism of harmonic oscillation behavior. In addition, the harmonic behavior boundaries of the system in circuit parameter spaces are given to guide the optimal design of the system. Finally, the effectiveness of the above analysis is verified by experimental results.
28 February 2023 in IEEE Transactions on Industrial Electronics
Compared with unipolar single-inductor dual-output (SIDO) dc–dc converters, the output common power flow in the bipolar SIDO dc–dc converters affects lots of system characteristics in high-frequency (HF) region, which poses great challenges for the modeling and design of the bipolar SIDO converters. In this article, a ripple-response model of the bipolar SIDO dc–dc converter is proposed to capture the HF characteristics by analyzing the response nature and the sampling process of the multi-piecewise current ripple. Based on the derived model, the design-oriented analysis with the change of some key parameters is presented to guide the system optimal design and power flow regulation. Then, the compensators are optimized to improve the dynamical performance and the HF stability simultaneously. Furthermore, the cross-regulation of the SIDO converter is explored via the common- and differential-mode transfer functions. Particularly, the effect of the output common power flow on the cross-regulation is revealed by identifying the frequency-domain coupling point. These analysis results help to suppress the cross-regulation significantly. Finally, the effectiveness of the model and analysis is verified by experimental results. These results show that the proposed method is more suitable for the bipolar SIDO converters to improve power flow regulation in comparison with the existing ones.
23 February 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
Due to strong nonlinear coupling effect amongst input/output ports and special cycle skipping effect, single-inductor bipolar-output (SIBO) DC-DC converters with one-cycle control may exhibit various bifurcation phenomena with complex border collision. This brief aims to investigate the cycle skipping effect and explore the occurrence mechanism of these nonlinear behaviors for stability improvement. On account of the cycle skipping effect, a set of the discrete-time mathematical expressions are derived to describe the dynamic characteristics of the one-cycle controlled (OCC) SIBO converter in discontinuous state space. Then, bifurcation analysis is performed by numerical simulation and eigenvalue trajectories. It is shown that cycle skipping effect activates more multi-cycle modes except single-cycle modes. Interestingly, the same slow-scale bifurcations in different operation region present various oscillatory form, which leads to hybrid-scale instability. Especially, the stability boundaries are presented in multi-mode space to guide optimal design. Finally, some experiment results are provided to verify the theoretical analysis.
1 February 2021 in International Journal of Circuit Theory and Applications
30 December 2020 in IET Power Electronics
In this study, multi‐harmonic oscillation behaviour and stability problem in double‐input buck/buck–boost inverter are investigated both theoretically and experimentally. First, the observer‐pattern model is obtained by the local orthogonal and autonomous transformation in order to eliminate the time‐variance effect from both fundamental component and the ‘hidden’ second‐harmonic in the double‐input cascade system. Based on the proposed model, bifurcation analysis method is employed to reveal the underlying mechanism of the multi‐harmonic oscillation behaviour and identify the dominant harmonics. It is shown that the occurrence of Hopf bifurcation results in the double‐adding harmonic oscillation, and the interaction between the double‐adding harmonic components and the ‘hidden’ second harmonic component is also responsible for the multi‐harmonic oscillation behaviour. Meanwhile, the occurrence of the multi‐harmonic oscillations leads to the decrease of the system efficiency. For stability enhancement, the harmonic‐stability sensitivity is presented to evaluate the influence of the key circuit parameters on the system stability quantitatively. In addition, the stability boundaries of the double‐input inverter for these key parameters are provided to guide the system optimal design. Finally, the effectiveness of the above analysis is verified by those experimental results.