1 December 2005 in Microelectronics Journal
22 July 2020 in International Journal of Electronics
This work introduces a low-cost test strategy for second-order lowpass filters implemented in analog reconfigurable circuits of PSoC1 devices. By adopting a functional approach, the specifications of the filters are determined through the analysis of their transient response features. The strategy relies on the device dynamic reconfiguration ability to minimise test hardware overhead. Additionally, it is capable of testing filters configured in all the programmable resources of the device. Test stimuli are produced in a signal generator implemented inside the chip. A test script running on a computer connected to an oscilloscope (or data acquisition board), processes the response of the filters and calculates their functional features. Experimental results in several chips show excellent stability and low errors against nominal values, proving the viability of the strategy. The proposal is compatible with field maintenance due to its low instrumental overhead. Additionally, it can be used as a low-cost production test, for debugging circuits during the development process, or as end-of-line testing.
30 December 2010 in IEEE Transactions on Device and Materials Reliability
In this paper, we analyze the thermomechanical effects occurring in a power DMOS transistor after a single-event burnout process. This paper focuses on simulation to determine a safe time at which the device should be disconnected from the power supply to prevent damage. This strategy has been proposed as a means to avoid dangerous values in the temperature or mechanical stress that can produce a catastrophic failure or compromise the reliability of the DMOS. We solve the problem with the finite element method, modeling the DMOS with a detailed simulation structure. In this paper, we show that it is not possible to assume that the temperature and stresses relax after power supply disconnection. Consequently, it is necessary to simulate the power down of the device for analyzing the evolution of the fields after disconnection. The simulation results show the existence of mechanical stress overshoots after disconnection. We show that the upper limit for the disconnection time is considerably different from the reported one in previous research.
1 November 2012 in Microelectronics Journal
28 March 2007 in Electrical Engineering
1 August 2004 in Journal of Electronic Testing