We report on stable, long-term operation of a diode-pumped solid-state laser (DPSSL) amplifying 15 ns pulses at 1029.5 nm wavelength to 10 J energy at 100 Hz pulse rate, corresponding to 1 kW average power, with 25.4% optical-to-optical efficiency. The laser was operated at this level for over 45 minutes (∼3 · 105 shots) in two separate runs with a rms energy stability of 1%. The laser was also operated at 7 J, 100 Hz for 4 hours (1.44 · 106 shots) with a rms long-term energy stability of 1% and no need for user intervention. To the best of our knowledge, this is the first time that long-term reliable amplification of a kW-class high energy nanosecond pulsed DPSSL at 100 Hz has been demonstrated.
We report on the successful amplification of 10 ns pulses to 10 J energy at 10 Hz in a DiPOLE laser amplifier using crystalline Yb:YAG/Cr:YAG composite slabs manufactured using adhesive-free bonding (AFB) technology. We demonstrate that bonded slabs are suitable for operation in high energy cryogenic laser amplifiers. We also report on frequency doubling of the beam amplified in the bonded slabs. When the pulse energy of the output infrared beam is set to 5 J, a pulse energy of 3.9 J is achieved in the green (corresponding to 78% conversion efficiency). Results demonstrate that AFB technology is suitable for producing large-sized gain material slabs and can overcome current limitations in the manufacture of large-aperture gain material pieces. We believe this work will facilitate energy scaling of high energy lasers where aperture scaling of optical elements is not achievable via conventional manufacturing techniques.
The Extreme Photonics and Applications Centre (EPAC) is a world-leading 10 Hz petawatt laser system being built in the Central Laser Facility (CLF) at the UK’s Science and Technology Facilities Council Rutherford Appleton Laboratory. EPAC will generate extreme conditions for fundamental laser-plasma physics and high-energy (multi-GeV) electron acceleration as well as providing secondary sources for industrial research applications. The facility will house a 10 Hz, 30 fs, 30 J laser driven by the CLF’s DiPOLE pump laser that is delivered to two experimental areas with upgrade paths for further additional beamlines. Laser areas are integrated on the second floor of a new, dedicated three-floor building, and the beam is transported around the facility’s radiation shielding to the ground floor experimental areas. The purpose-built facility has been designed following the principles from the hierarchy of controls—elimination, substitution, engineering controls, administrative controls, and personal protective equipment. In this paper, we discuss the fundamental approach to laser safety undertaken as part of the facility design, considering the entire laser system chain, beam transport, and delivery. The approach to minimizing risks and fundamental hazards through the facility design, installation, and commissioning phases is outlined. The EPAC interlock systems play multiple roles, providing safety functions for both laser and ionizing radiation, employing a multilayered approach to safety using a combination of trap key and multiple Electrical/Electronic/Programmable Electronic (E/E/PE) systems to provide the required safety integrity level.