Jiangsu Key Laboratory of Chemical Pollution Control and Resources Reuse, School of Environmental and Biological Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
Auto-generated profile, based on publicly available information
Aotian Gu
Jiangsu Key Laboratory of Chemical Pollution Control and Resources Reuse, School of Environmental and Biological Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
Liquid scintillator detectors have great advantages in the field of radionuclide detection because of their low detection limit, high sensitivity, and diverse functions. However, the material properties of liquid scintillators directly determine their detection effectiveness, which leads to their poor vertex resolution and particle identification. In this work, we introduce the improvement methods, choices, and properties of different novel liquid scintillator materials in recent years. This article is expected to provide references for the development and research of liquid scintillator materials in various application fields.
11 September 2023 in Journal of Solid State Chemistry
With the popularization of nuclear energy in the field of energy application, the effective removal of radioactive iodine isotopes is crucial for the long-term development of nuclear energy. In this paper, bimetallic MOFs with different Cu/Bi ratios were synthesized by a simple solvothermal method, and a bimetallic nano-adsorbent Cux/Bi10−x-NC was prepared by one-step calcination. Adsorption experiments show that Cux/Bi10−x-NC exhibits excellent adsorption performance for iodide ions, gaseous iodine, and I2 in cyclohexane solution, with the maximum adsorption capacities reaching up to 484.08 and 233.11 mg g−1, respectively. Through the characterization of the material system before and after adsorption, this excellent adsorption performance is attributed to the synergistic effect between Cu and Bi, as well as the highly dispersed adsorption active sites derived from the MOF template. Therefore, the prepared Cux/Bi10−x-NC has great potential in the efficient and stable capture of various forms of iodine.
The exploration of transforming various metals as metal sources into metal organic frameworks (MOFs) has attracted considerable attention in recent years. This study used triethylamine and 5,6-dimethylbenzimidazole (DMBIM) to modify the iron-doped cobalt zeolite imidazole framework on carbon fiber structure. The results showed that the ZIF(Fe/Co)1.25@CNF exhibited high CEF removal efficiency that over 97 of ceftiofur sodium (CEF) was removed within 10min, which was significantly higher than that of the common ZIF-67 materials. Compared with other ZIF-67 composites, ZIF(Fe/Co)x@CNF has a larger specific surface area, resulting in a larger contact area and more active sites during the reaction. After the introduction of DMBIM, the ZIF(Fe/Co)1.25@CNF not only easily separated from the solution but also enhanced the hydrophobicity, which provided higher catalytic stability and catalytic performance. In addition, the effects of different catalyst ratios, pollutant concentrations, solution pH, and different radicals (OH, SO4•−, 1O2) on the activation of peroxymonosulfate (PMS) were investigated. The mechanism of degradation was elucidated by electron paramagnetic resonance experiments. This study provides a new perspective for the preparation of high-performance MOF catalysts with excellent catalytic performance and may facilitate the application of MOF materials in more practical situations.