With the advancement of wireless communication to sub-terahertz (THz) and millimeter-wave (mmWave) bands, accurate channel models and simulation tools are becoming increasingly important for modeling a wide range of frequencies and scenarios. This paper provides a comprehensive tutorial on generating drop-based and spatial consistency-based channels using the open-source MATLAB-based NYU Channel Model Simulator (NYUSIM). NYUSIM is built on extensive real-world radio propagation measurements for the frequency range of 0.5-150 GHz, covering a variety of scenarios such as Urban Microcell (UMi), Urban Macrocell (UMa), Rural Macrocell (RMa), Indoor Hotspot (InH), and Indoor Factory (InF). Additionally, an overview of the evolution of simulators used to design and analyze wireless systems since the early days of cellular communication is also provided. We introduce the most popular types of simulators used in academia and industry, such as Channel Simulators (CSs), Link Level Simulators (LLSs), System Level Simulators (SLSs), and Network Simulators (NSs), to study wireless communication systems for 5G and beyond. Owing to the widespread adoption of the 3rd Generation Partnership Project (3GPP) Stochastic Channel Model (SCM) for channel generation in various simulators, we conduct a comparative analysis between the 3GPP SCM and NYUSIM channel model to highlight their differences. Moreover, NYUSIM’s versatility extends beyond its MATLAB implementation, as it can be implemented in various LLSs, SLSs, and NSs, enabling researchers to incorporate real-world measurement-based channels into their simulations. To illustrate this capability, we showcase NYUSIM’s implementation in ns-3, a widely used open-source discrete event network simulator. Additionally, we provide several applications of NYUSIM to highlight its potential uses.
6 December 2023 in IEEE Transactions on Wireless Communications
This paper presents sub-Terahertz (THz) channel characterization and modeling for an indoor industrial scenario based on radio propagation measurements at 142 GHz in four factories. We selected 82 transmitter-receiver (TX-RX) locations in both line-of-sight (LOS) and non-LOS (NLOS) conditions and collected over 75,000 spatial and temporal channel impulse responses. The TX-RX distance ranged from 5 to 87 m. Steerable directional horn antennas were employed at both ends and were switched between vertical and horizontal polarization. Measurements were conducted with the low RX and high RX to characterize the propagation channel for close-to-floor applications such as automated guided vehicles. Results show that the low RXs experience an average path loss increase of 10.7 dB and 6.0 dB at LOS and NLOS locations, respectively. In addition, channel enhancement measurements were conducted using a steerable large flat metal plate as a passive reflecting surface, demonstrating omnidirectional path loss reduction from 0.5 to 22 dB with a mean of 6.5 dB. This paper presents the first statistical channel characterization and path loss modeling at sub-THz frequencies, highlighting the potential for ultra-broadband factory communications in the 6G era.
23 February 2024 in IEEE Transactions on Antennas and Propagation
A comprehensive understanding of outdoor urban radio propagation at mmWave and sub-THz frequencies is crucial for enabling novel applications such as wireless cognition, precise position-location, and sensing. This paper summarizes extensive measurements and statistical analysis of outdoor radio propagation data collected in New York City between 2012 and 2021 to formulate a multi-band empirical 3-D statistical channel model (SCM) for outdoor urban open squares and streets. Path loss models and SCMs are derived from over 21000 power delay profiles (PDP) measured in Brooklyn and Manhattan. Analysis of multipath components in PDPs reveal underlying statistical distributions for wireless channel parameters, including number of time-clusters (TC), subpaths in TCs, delays and powers of TCs and subpaths, and spatial-cluster directions. Observations at 142 GHz suggest a sparse channel as subpaths in TCs are exponentially distributed with narrower spread spatial-clusters and higher Ricean K-factor, unlike uniform distributions at 28 and 73 GHz. The proposed SCMs at 142, 73, and 28 GHz extend the open-source NYUSIM channel simulator into sub-THz bands up to 150 GHz. The SCMs can aid in designing modems, antenna arrays, beamforming, and spatial multiplexing approaches, while providing an empirical baseline for propagation simulation and prediction tools, such as ray tracers.
17 October 2024 in IEEE Transactions on Antennas and Propagation
Site-specific wireless channel simulations via ray tracers can be used to effectively study wireless, decreasing the need for extensive site-specific radio propagation measurements. To ensure that ray tracer simulations faithfully reproduce wireless channels, calibration of simulation results against real-world measurements is required. In this study we introduce NYURay, a 3D ray tracer specifically tailored for mmWave and sub-THz frequencies. To reliably generate site-specific wireless channel parameters, NYURay is calibrated using radio propagation measurements conducted at 28, 73, and 142 GHz in diverse scenarios such as outdoor areas, indoor offices, and factories. Traditional ray tracing calibration assumes angle-dependent reflection, requiring slow iterative optimization techniques with no closed form solution. We propose a simpler and quicker novel calibration method that assumes angle-independent reflection. The effectiveness of the proposed calibration approach is demonstrated using NYURay. When comparing the directional multipath power predicted by NYURay to the actual measured power, the standard deviation in error was less than 3 dB in indoor office environments and less than 2 dB in outdoor and factory environments. The root mean square (RMS) delay spread and angular spread was underpredicted by NYURay due to incomplete environmental maps available for calibration, however an overall agreement between the measured and simulated values was observed. These results highlight the high level of accuracy NYURay provides in generating the site-specific real-world wireless channel.
The next generation of wireless networks will use sub-THz frequencies alongside mmWave frequencies to enable multi-Gbps and low latency applications. To enable different verticals and use cases, engineers must take a holistic approach to build, analyze, and study different parts of the network and the interplay among the lower and higher layers of the protocol stack. It is of paramount importance to accurately characterize the radio propagation in diverse scenarios such as urban microcell (UMi), urban macrocell (UMa), rural macrocell (RMa), indoor hotspot (InH), and indoor factory (InF) for a wide range of frequencies. The 3GPP statistical channel model (SCM) is oversimplified and restricted to the frequency range of 0.5-100 GHz. Thus, to overcome these limitations, this paper presents a detailed implementation of the drop-based NYU channel model (NYUSIM) for the frequency range of 0.5–150 GHz for the UMi, UMa, RMa, InH, and InF scenarios. NYUSIM allows researchers to design and evaluate new algorithms and protocols for future sub-THz wireless networks in ns-3.
Channel models are a fundamental component of wireless communication systems, providing critical insights into the physics of radio wave propagation. As wireless systems evolve every decade, the development of accurate and standardized channel models becomes increasingly important for the development, evaluation and performance assessment of emerging technologies. An effort to develop a standardized channel model began around 2000 through the Third Generation Partnership Project (3GPP) and the International Telecommunication Union (ITU) with the aim of addressing a broad range of frequencies from sub-1 GHz to 100 GHz. Prior efforts focused heavily on sub-6 GHz bands and mmWave bands, and there exist some gaps in accurately modeling the 7-24 GHz frequency range, a promising candidate band for 6G. To address these gaps, 3GPP approved a Release (Rel) 19 channel modeling study. This study resulted in several enhancements to the channel models, including the ability to accurately model a Suburban Macrocell (SMa) scenario, realistic User Terminal (UT) antenna models, variability in the number of clusters, variability in the number of rays per cluster, a framework for capturing variability in power among all polarizations, near field (NF) propagation, and spatial non-stationarity (SNS) effects, all of which may be crucial for future 6G deployments. This paper presents the outcomes of this study and provides an overview of the underlying rationale, and key discussions that guided the validation, refinement, and enhancements of the 3GPP TR 38.901 channel models.