23 September 2022 in Science Advances
Efficient doping for modulating electrical properties of two-dimensional (2D) transition metal dichalcogenide (TMDC) semiconductors is essential for meeting the versatile requirements for future electronic and optoelectronic devices. Because doping of semiconductors, including TMDCs, typically involves generation of charged dopants that hinder charge transport, tackling Coulomb scattering induced by the externally introduced dopants remains a key challenge in achieving ultrahigh mobility 2D semiconductor systems. In this study, we demonstrated remote charge transfer doping by simply inserting a hexagonal boron nitride layer between MoS 2 and solution-deposited n-type dopants, benzyl viologen. A quantitative analysis of temperature-dependent charge transport in remotely doped devices supports an effective suppression of the dopant-induced scattering relative to the conventional direct doping method. Our mechanistic investigation of the remote doping method promotes the charge transfer strategy as a promising method for material-level tailoring of electrical and optoelectronic devices based on TMDCs.
23 July 2022 in Nature Communications
Embedding metal-halide perovskite particles within an insulating host matrix has proven to be an effective strategy for revealing the outstanding luminescence properties of perovskites as an emerging class of light emitters. Particularly, unexpected bright green emission observed in a nominally pure zero-dimensional cesium–lead–bromide perovskite (Cs4PbBr6) has triggered intensive research in better understanding the serendipitous incorporation of emissive guest species within the Cs4PbBr6 host. However, a limited controllability over such heterostructural configurations in conventional solution-based synthesis methods has limited the degree of freedom in designing synthesis routes for accessing different structural and compositional configurations of these host–guest species. In this study, we provide means of enhancing the luminescence properties in the nominal Cs4PbBr6 powder through a guided heterostructural configuration engineering enabled by solid-state mechanochemical synthesis. Realized by an in-depth study on time-dependent evaluation of optical and structural properties during the synthesis of Cs4PbBr6, our target-designed synthesis protocol to promote the endotaxial formation of Cs4PbBr6/CsPbBr3 heterostructures provides key insights for understanding and designing kinetics-guided syntheses of highly luminescent perovskite emitters for light-emitting applications.
5 February 2026 in Journal of the American Chemical Society
26 August 2026 in Advanced Functional Materials
22 September 2026 in Physical Review Materials
Thin film ${\mathrm{BaTiO}}_{3}$ has one of the highest known Pockels coefficients ($>1200$ pm/V), making it an attractive material for use in electro-optic devices. It is advantageous to integrate ${\mathrm{BaTiO}}_{3}$ onto silicon to enable complementary metal-oxide-semiconductor (CMOS) compatible processing. However, synthesis of high-quality ${\mathrm{BaTiO}}_{3}$ directly on silicon remains a challenge. Here, we synthesize ${\mathrm{BaTiO}}_{3}$ using hybrid metal-organic molecular beam epitaxy (hMBE) and demonstrate its transfer onto silicon using thermocompression bonding and chemical lift off. Hybrid metal-organic MBE enables self-regulated synthesis of highly stoichiometric thin films at high growth rates ($>100$ nm/hr). Our transfer method results in millimeter-scale areas of atomically flat, crack-free ${\mathrm{BaTiO}}_{3}$ making it a potentially scalable method. Finally, we demonstrate the robustness of our transferred thin films to fabrication processes required to make devices through characterization of lithographically patterned and etch-transferred submicron features.