7 February 2022 in Structural Concrete
The current effort towards the progressive switch from carbon‐based to renewable energy production is leading to a relevant spreading of both on‐ and off‐shore wind turbine towers. Regarding reinforced concrete shallow foundations of onshore wind turbine steel towers, possible reductions of reinforcement may increase their sustainability, speed of erection, and competitiveness. The article presents the results of an experimental program carried out at Politecnico di Milano concerning both cyclic and monotonic loading, simulating extreme wind conditions on 1:15 scaled models of wind turbine steel towers connected by stud bolt adapters to reinforced concrete shallow foundations embedded in a sandy soil. Three couples of foundation specimens were tested with different reinforcement layouts: (a) similar to current praxis, (b) without shear reinforcement, and (c) without shear reinforcement and with 50% of ordinary steel rebars replaced by steel fibers. Additional vertical loads were added to the small‐scale models in order to ensure similarity in terms of stresses. The test results allowed to (i) characterize the mechanical behavior of the foundation element considering soil‐structure interaction under both service and ultimate load conditions, (ii) assess the foundation failure mode, (iii) highlight the role of each typology of reinforcing bars forming the cage, and (iv) provide hints for the optimization of these latter.
24 July 2017 in Acta Geotechnica
1 November 2016 in Géotechnique
Macroelement plasticity models are being increasingly applied to study non-linear soil–foundation interaction (SFI) problems. Macroelement models are particularly appealing from a computational standpoint, as they can capture the essence of SFI by means of a few degrees of freedom. However, all the macroelement formulations available in the literature suffer from the same limitation, that is the incapability of accounting for changes in both geometry and loading/boundary conditions. Accordingly, macroelement models are usually calibrated to analyse a given boundary value problem, with no chance of handling situations with significant variations in embedment, lateral surcharge and/or phreatic level. The present work shows how standard soil modelling concepts can be exploited to reproduce relevant ‘configurational features’ of non-linear SFI. A macroelement framework is here proposed to simulate the drained load–settlement response of shallow footings on sand in the presence of varying surface/body forces. As a first step, the ideal case of a weightless soil layer is exclusively considered. The macroelement constitutive equations are conceived/calibrated on a minimal set of finite-element results; the satisfactory predictive capabilities of the macroelement model are finally demonstrated by retrospectively simulating selected finite-element tests.
4 April 2023 in European Journal of Environmental and Civil Engineering
Piled foundations are commonly employed to reduce settlements of artificial earth embankments on soft soil strata and geosynthetic reinforcements are installed at the embankment base to increase pile spacing and reduce construction costs. Despite the well-documented effectiveness of this technique, the mechanical processes, developing during the construction in the different elements constituting the ‘geo-structure’, are not fully understood and the design approaches are based on very simplified assumptions. They disregard the deformability of the various elements constituting the system and cannot be employed to estimate settlements. With the aim of introducing a displacement-based design approach to optimise the use of reinforcements and piles, in this article, the mechanical response of the system during the embankment construction is studied by means of large displacement non-linear finite difference numerical analyses, in which the geosynthetic reinforcement is modelled as an elastic membrane. The arching effect developing within the embankment body is described and the evolution of the process zone, where shear strains localise, is discussed. The global system response is described in terms of (i) average, (ii) differential settlements at the top of the embankment and (iii) maximum tensile force within the geosynthetic reinforcement.
23 June 2023 in International Journal for Numerical and Analytical Methods in Geomechanics
Piled foundations are commonly employed to reduce settlements in artificial earth embankments founded on soft soil strata. To limit the number of piles and, consequently, construction costs, popular is the use of geosynthetic reinforcements laid at the embankment base. Nowadays, the complex interaction between geosynthetics, piles and soil is not yet fully understood and, in the scientific literature, simplified displacement‐based approaches to choose reinforcements, pile diameter and spacing are missing. In this paper, the authors, starting from the critical analysis and theoretical interpretation of finite difference numerical results, introduce a new mathematical model to rapidly assess both (i) differential/average settlements at the top of the embankment and (ii) maximum tensile forces in the basal reinforcement. The model, conceived to reproduce the response of a pile belonging to the central part of the embankment, is the result of an upscaling procedure based on a suitable sub‐structuring of the spatial domain (an axisymmetric unit cell) and on the concept of plane of equal settlements. For the foundation soil, drained conditions are considered, the pile skin roughness is disregarded, and piles are assumed to get the rigid bedrock. As generalised kinematic variables average and differential settlements are employed, whereas as generalized static ones the embankment height and the geosynthetic axial force. The model is validated against field measurements (where layered foundation soil and pile caps are included) and an application example of the model, used as a preliminary design tool in a displacement‐based perspective, is finally provided.
1 September 2020 in Géotechnique
Piled foundations are largely employed as settlement reducers in the design of artificial embankments on soft soil strata. The commonly employed design methods are, however, based on simplified approaches not allowing the assessment of average and differential settlements at the top of the embankment. With this objective, the authors introduce a generalised constitutive relationship capable of accounting for irreversibilities stemming from both geometrical evolution and soil yielding. The model derives from the interpretation of the results of a campaign of three-dimensional elastic–plastic finite-difference numerical analyses describing the embankment construction process. Numerous simplifying assumptions (for instance smooth pile shaft, drained conditions) have been employed. Nevertheless, this does not compromise the theoretical value of the proposed approach. From a practical point of view, this model is a useful tool for geotechnical engineers to employ with a displacement-based design perspective.