Accurate prediction of buckling loads in composite structures is essential, as their anisotropic and inhomogeneous properties complicate structural analysis. However, traditional predictive models often face limitations such as the inclusion of statistically insignificant polynomial terms in Response Surface Methodology (RSM) and poor learning performance in Artificial Neural Networks (ANN) due to unprocessed and limited data sizes. This study aimed to develop and evaluate predictive models for the buckling load of hybrid graphite/glass epoxy composite laminates using different data sizes. Two datasets were employed, comprising 27 runs generated through a Full Factorial Design (FFD) under the Design of Experiment (DOE) approach and 100 customised experimental runs. Two modelling approaches, RSM and ANN, were employed to predict the buckling load obtained from finite element analysis (FEA). The overall range of computed buckling loads was wide, spanning from 3.627 kN to 1730.8 kN, confirming the strong sensitivity of the structure to the design variables. The highest buckling loads occurred at [45, 1, 3 mm] (angle, volume fraction, thickness), and for hybrid laminates at [45, 0.5, 3 mm]. The RSM predictions produced ratios close to one when compared with FEA results, while the ANN models showed both underprediction and overprediction tendencies. The t-test results indicated no statistically significant difference between the 27 and 100 experimental runs, suggesting that model accuracy was influenced more by modelling approach and data treatment than dataset size. This study may contribute to enhancing knowledge of the buckling behaviour and failure of hybrid graphite/glass composite structures, which will help engineers design safer structures by reducing the risk of buckling.
This study analysed the buckling behaviour of thin-cylindrical shells under axial compression, addressing the persistent disparity between theoretical predictions and numerical simulations. The research investigated the influence of key parameters height, Young's modulus, and thickness on the critical buckling load. A Finite Element Analysis (FEA), specifically a Geometrically and Materially Non-Linear Analysis (GMNA), was performed using the software ABAQUS to model the shells. To bridge the gap between simulation and theory, a mathematical model for uncertainty analysis was developed in MATLAB, employing the Monte-Carlo Simulation (MCS) and referencing Rankine's theory. This study introduces a novel analytical framework that integrates Finite Element Analysis (FEA) and uncertainty analysis to resolve discrepancies in buckling predictions for thin cylindrical shells. The model's accuracy was validated with a maximum error of less than 13% compared to existing studies, and the uncertainty analysis demonstrated a robust standard deviation of 0.249 (less than 1%). The findings revealed that thickness is the most influential parameter; a 10% increase in thickness led to a 10.86% increase in the buckling load. Young's modulus had a moderate impact, with a 10% increase causing a 0.28% rise in the buckling load, while height was the least influential, with a 10% increase leading to only a 0.1% increase. This research provides valuable insights into the complexities of predicting critical buckling loads, highlighting the distinct impact of geometric and material properties on the structural behaviour of cylindrical shells.