30 June 2023 in Smart Materials and Structures
Fiber metal laminates (FMLs) are of high interest for lightweight structures as they combine the advantageous material properties of metals and fiber-reinforced polymers (FRPs). However, low-velocity impacts can lead to complex internal damage. Therefore, structural health monitoring with guided ultrasonic waves (GUWs) is a methodology to identify such damage. Numerical simulations form the basis for corresponding investigations, but experimental validation of dispersion diagrams over a wide frequency range is hardly found in the literature. In this work the dispersive relation of GUWs is experimentally determined for an FML made of carbon FRP and steel. For this purpose, multi-frequency excitation signals are used to generate GUWs and the resulting wave field is measured via laser scanning vibrometry. The data are processed by means of a non-uniform discrete 2d Fourier transform and analyzed in the frequency-wavenumber domain. The experimental data are in excellent agreement with data from a numerical solution of the analytical framework. In conclusion, this work presents a highly automatable method to experimentally determine dispersion diagrams of GUWs in FML over large frequency ranges with high accuracy.
29 April 2024 in Structural Health Monitoring
Guided ultrasonic wave based structural health monitoring has been of interest over decades. However, the influence of prestress states on the propagation of Lamb waves in thin-walled structures is not fully covered yet. So far experimental work presented in the literature only focuses on a few individual frequencies, which does not allow a comprehensive verification of the numerous numerical investigations. Furthermore, most work is based on the strain-energy density function by Murnaghan. To validate the common modeling approach and to investigate the suitability of other nonlinear strain-energy density functions, an extensive experimental and numerical investigation covering a large frequency range is presented here. The numerical simulation comprises the use of the Neo-Hooke as well as the Murnaghan material model. It is found that these two material models show qualitatively similar results. Furthermore, the comparison with the experimental results reveals that the Neo-Hooke material model reproduces the effect of prestress on the difference in the Lamb wave phase velocity very well in most cases. For the wave mode at higher frequencies, however, the sign of this difference is only correctly predicted by the Murnaghan model. In contrast to this, the Murnaghan material model fails to predict the sign change for the wave mode.
15 February 2022 in Research Square
Background: Non-destructive structural health evaluation of thin-walled components on the basis of Lamb wave propagation is a widely used approach. However, most current methods to measure the dispersive behavior of Lamb waves are time based approaches and are not easily capable of high automation to measure influences on the wave propagation along a wide range of frequencies. Objective: Develop and validate a highly automatable method to measure Lamb wave dispersion diagrams with high accuracy. To be able to broadband examinate influences, which have only a small effect on the wave propagation.Methods: The use of frequency based approaches like the 2d Fourier transform is a known method to measure Lamb waves. This investigation tries to bring together the advantage of the high automation as well as the high accuracy this method offers, by taking into account a non-uniform distribution of the measurement points and using particularly suitable excitation signals for high accuracy. Results: The here stated method is capable of automatically creating dispersion diagrams for Lamb waves with high accuracy, automation and reproducibility. The experimental results are compared with analytical results and are in good agreement. Conclusions: This investigation shows 2d Fourier transform as a method to create dispersion diagrams of Lamb waves is an accurate and especially highly automatable approach with high accuracy.
14 December 2021 in Proceedings in Applied Mathematics and Mechanics
Lamb wave based Structural Health Monitoring (SHM) is a well‐known approach in today's mechanical engineering [1, 2]. One possible approach to determine the behavior of Lamb waves experimentally lies in the use of a frequency‐based approach using a 2d Fourier transform (2d‐FT) [3–5]. A closer look at this approach reveals that it has been used to represent dispersion relationships in large frequency ranges, but its potential for high accuracy has not been fully exploited. In this work a measurement and evaluation system for the experimental determination of dispersion diagrams is developed. It is able to cover large frequency ranges and it additionally shows a high degree of automation and accuracy. This allows a broadband examination of influences, which have only a small effect on the wave propagation. To verify the accuracy of the developed measurement and data evaluation method, experimental results of an aluminum specimen are compared with those from analytical solutions. A good agreement is achieved.