25 November 2020 in Measurement Science and Technology
Underwater structure inspections are essential for infrastructure maintenance, such as hydraulic facilities, bridges, and ports. Due to the influence of turbidity, dark light, and distortion, the traditional methods cannot satisfy the requirements of on-site inspection applications. This paper proposed a methodology of the point cloud data capture in the turbid underwater environment. The method consisted of an acquisition device, a distortion correction algorithm, and a parameter optimization approach. The acquisition device was designed by composing a silt-removing module, a structured light camera module, and a clear water replacement module, which can integrate with an underwater inspection robot. The underwater multi-medium plane refraction distortion model was established through analysis, and a refraction correction algorithm was provided to correct the distortion. To obtain the maximum field of view of the point cloud, the nonlinear optimization approach was used to select the medium material and thickness. After the real experiments using the Intel RealSense sr300 depth camera, maximum measuring distance could range up to 253 mm in water, the accuracy of the point cloud of the underwater target objects was ±3.77 mm, and the maximum error was 8.76%. Compared with other methods, this method was more suitable for 3D point cloud capture in the turbidity environment.
5 December 2025 in Ocean Engineering
13 February 2025 in IEEE Transactions on Instrumentation and Measurement
Currently, concrete structural damage detection primarily relies on industrial cameras to capture 2-D images for identifying cracks and voids. However, assessing the extent of damage using these images is challenging. The existing volume measurement methods face significant errors and poor robustness due to irregularities in concrete defect formation in real-world scenarios. To address these challenges, this article proposes a quantitative analysis method for concrete defect volumes based on an improved point cloud slicing technique. Initially, high-precision 3-D cameras capture local point cloud data of concrete. Using a fusion method that integrates local curvature and relative distance, the areas showing defects in the concrete point cloud were successfully extracted. Subsequently, these defect areas undergo slicing, and an enhanced Euclidean clustering method effectively separates the contour boundaries of each slice. Further refinement involves combining the ray parity method and area effectiveness principle to accurately differentiate containment relationships among multicontour regions and calculate precise areas for each slice. By summing the areas of all slices, the volume of concrete defects is accurately determined. This article validates the proposed method’s accuracy and robustness in volume calculations through comparative experiments on standard specimens with different features and performs quantitative analysis of concrete defect volumes in real-world scenarios. Experimental results demonstrate that the proposed method outperforms the existing approaches in volumetric quantification of concrete defect point clouds, with an average measurement error of 3.08%. This represents a significant improvement over current methods and exhibits high robustness, providing a promising solution for evaluating the extent of concrete defect damage.
2 July 2025 in IEEE Transactions on Instrumentation and Measurement
The weak geometric features and high repeatability of information in tunnel scenes are important factors that make point cloud fine registration very difficult. This makes it challenging for descriptors to distinguish information differences between individual key points. To solve the registration issues caused by the scarcity of key points and high feature similarity in tunnels, this paper introduces a tunnel appendage structure (TAS) descriptor and a registration framework that improve the registration capability of the descriptor. The TAS descriptor encompasses two types of information for key points: the first is the local structure and primary direction of the tunnel, which belong to local feature information; the second is the positional relationship between the key point and the central axis, which belongs to global feature information. The combination of local and global features enhances the descriptive capability of the TAS descriptor, enabling it to accurately match corresponding key points. The registration framework divides the six-parameter registration problem into two three-parameter problems, thereby reducing the descriptive capability requirement of the descriptor in registration and improving algorithm efficiency. Experiments have shown that the method proposed in this paper is superior to existing advanced methods in terms of registration accuracy and speed in tunnel registration.
3 January 2026 in Ocean Engineering