4 December 2018 in Optica
Mode-division multiplexing is a promising and cost-effective way to increase the communication capability of integrated photonic circuits, for both classical and quantum information processing. To construct large-scale on-chip multimode routing systems, the multimode waveguide crossing is one of the key components. However, there have been only a few dual-mode waveguide crossings reported, which can support merely two waveguide modes or two crossing channels. This severely limits the density and capacity of multimode routing systems. Here we demonstrate for the first time, to the best of our knowledge, a universal multimode waveguide star crossing based on transformation optics, which can handle, in principle, any number of waveguide modes and any number of crossing channels as well. The structure is transformed from a Maxwell fisheye and can realize aberration-free imaging for each waveguide mode. A gray-scale electron-beam lithography is adopted to fabricate it on a commercial silicon-on-insulator wafer. The proposed multimode waveguide star crossing has little loss and low crosstalk throughout an ultra-broad wavelength range of . Our study paves the way for realizing highly integrated and large capacity on-chip multimode routing and communication systems.
25 September 2009 in IEEE Photonics Technology Letters
Flat band slow light in symmetric line defect photonic crystal waveguides formed by adding dielectric pillars in the air holes nearest to the waveguide core is investigated. By adjusting the radii of the new dielectric pillars, a linear band in the photonic band structure appears which denotes low group velocity dispersion. High average group index of 74.4 with 2.3-nm bandwidth is demonstrated in an optimized waveguide by finite-difference time-domain simulation.
17 November 2020 in Photonics Research
Multimode waveguide bend is one of the key components for realizing high-density mode-division multiplexing systems on chip. However, the reported multimode waveguide bends are either large, bandwidth-limited or fabrication-complicated, which hinders their applications in future high-density multimode photonic circuits. Here we propose a compact multimode waveguide bend supporting four TE modes simply by shape-optimizing with transformation optics. The shape of the waveguide is optimized in the virtual space with gradient distribution of the refractive index, so that the scattering loss and intermode cross talk are well suppressed. After conformal mapping back into the physical space, a compact (effective radius of 17 μm) multimode bending waveguide is obtained. Simulations show that the proposed multimode waveguide bend has little loss ( ) and low cross talk ( ) throughout an ultrabroad wavelength range of 1.16–1.66 μm. We also fabricated the shape-optimized multimode bending waveguide on a silicon-on-insulator wafer. At 1550 nm wavelength, the measured excess losses for the four lowest-order TE modes are less than 0.6 dB, and the intermode cross talks are all below . Our study paves the way for realizing high-density and large-scale multimode integrated optical circuits for optical interconnect.
22 May 2023 in Optics & Laser Technology
1 August 2009 in Optics Communications
8 September 2020 in Applied Physics Letters
We study the effects of asymmetrical magnetization and an optoelectronic tunable band structure on the transmission of particles in a MoS2 tunnel junction. Based on the results, we propose a model for a multifunctional coupler as a single system incorporating giant magnetoresistance, a spin–valley filter, and a spin–valley valve. The device is made up of ferromagnetic/ferromagnetic/normal junctions, with an off-resonant light and an electric gate potential functioning as the spin–valley filter and spin–valley valve, respectively. Increasing the asymmetrical magnetization is found to substantially enhance the tunneling magnetoresistance (TMR) of the system, leading to giant TMR. The spin–valley filtering is based on the spin imbalance modulation that arises from asymmetrical magnetization and the valley degeneracy breaking of off-resonant light, and the spin–valley valve is produced by altering the effective density of states of spin/valley polarized bands via the gate potential that controls the flow of spin/valley polarized particles. By fixing the magnetization configurations, one specific spin–valley filter and spin–valley valve can be acquired by tuning an external parameter to the corresponding spin/valley polarized energy windows.