Heydar Dehghanpour

Heydar Dehghanpour

Auto-generated profile, based on publicly available information

Heydar Dehghanpour

Fibrobeton Company, R&D

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

30 December 2022 in Journal of Sustainable Construction Materials and Technologies
Verified
Journal Article
Open access
PDF file
HDHeydar Dehghanpour
Heydar Dehghanpour
FDFatih Doğan
Fatih Doğan
Serkan SubaşıSerkan Subaşı
Serkan Subaşı
MMMuhammed Marasli
Muhammed Marasli
The production of electrically conductive concrete was introduced years ago among construction materials, generally for anti-icing. The present study investigates the electrical, mechanical, dynamic, and microstructural properties of recycled ferrochrome filled cementitious mortars, containing single-walled carbon nanotubes (SWCNTs) and steel fiber. 7, 14, and 28-day non-destructive and 28-day compressive and bending tests of cementitious conductive mortars obtained from five different mixtures were performed. Two-point uniaxial method was used to determine the electrical conductivity properties of the samples. The damping ratio of the samples was obtained by performing dynamic resonance tests. Ultrasound pulse velocity (UPV) and Leeb hardness tests were performed as other non-destructive testing methods. Microstructure analysis at the interfaces of conductive concrete samples were characterized by scanning electron microscopy (SEM), EDS (Energy-Dispersive X-ray Spectroscopy), and X-ray diffraction (XRD). According to the experimental results, all data agreed and confirmed each other. When SWCNT is used in combination with steel fiber, the conductive mortar samples exhibited reasonable conductivity, while their mechanical properties turned out to below.

30 September 2022 in Journal of Sustainable Construction Materials and Technologies
Verified
Journal Article
Open access
PDF file
FDFatih Doğan
Fatih Doğan
HDHeydar Dehghanpour
Heydar Dehghanpour
Serkan SubaşıSerkan Subaşı
Serkan Subaşı
MMMuhammed Marasli
Muhammed Marasli
Recently, it is known that carbon fiber, which is a conductive fiber, is used in different mixture designs and developing electrically conductive cementitious materials. However, the evaluation of ferrochrome as a recycled aggregate in the mixture of these special concretes has still not been investigated. In this study, electrically conductive mortars were produced by using 100% recycled ferrochrome aggregate with a particle size of less than 1 mm as filling material and using carbon fiber (CF) in 4 different ratios, 0%, 0.5%, 0.75% and 1%. 2, 14, 28, 90 and 180 days electrical resistivity properties of the obtained samples were investigated. In addition, 28-day compressive strength, flexural strength, dynamic resonance, ultrasonic pulse velocity (UPV), Leeb hardness, scanning electron microscope (SEM) and X-Ray Diffraction (XRD) tests were performed on all samples. The obtained results were compared with the literature and it was proved that ferrochrome can be used as a reasonable aggregate in conductive mortars.

2 December 2022 in Materials Science
Verified
Journal Article
Closed access
PDF file
Serkan SubaşıSerkan Subaşı
Serkan Subaşı
HDHeydar Dehghanpour
Heydar Dehghanpour
MMMuhammed Marasli
Muhammed Marasli
Nano-sized defects in Glass fiber Reinforced Concrete (GRC) shell elements can cause damage over time, leading to mechanical and durability problems. Therefore, in this study an experimental program was conducted to investigate the application of single-walled carbon nanotube as a nano-additive material in GRC. Since there is no study on GRC-carbon nanotube (CNT) composites in the literature, the behavior of CNTs on conventional concretes was discussed. Five different GRC-SWCNT composite mixtures containing 0, 0.007, 0.010, 0.015 and 0.020 wt.% single walled carbon nanotube (SWCNT) were obtained. Calcined kaolin and acrylic polymer were used as pozzolanic and chemical modification materials in the mixtures, respectively. Workability, density, capillarity, pressure, flexural, tensile, impact, Leeb hardness and FE-SEM tests of the produced samples were carried out. According to the results obtained, the optimum SWCNT ratio in GRC mixtures was found to be 0.015 %. It was observed that there was a linear relationship between the mechanical results. FE-SEM images confirmed that SWCNTs act as bridges for micro-cracks and reinforce the microstructure.

21 June 2022 in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Verified
Journal Article
Closed access
PDF file
MSMuhammet Sei̇s
Muhammet Sei̇s
Serkan SubaşıSerkan Subaşı
Serkan Subaşı
MMMuhammed Marasli
Muhammed Marasli
HDHeydar Dehghanpour
Heydar Dehghanpour
Nanoteknolojinin gelişmesi ile birlikte inşaat sektöründe de özellikle yapı malzemeleri alanında spesifik özelliklere sahip nano malzemelerin kullanılması araştırmacıların ilgisini çekmektedir. Literatüre göre çimentolu malzemelerin karışımlarında karbon nanotüp (CNT)'ler kullanılabilirliği yüksek olan nano malzemeler arasında yer almaktadır. Çok duvarlı karbon nanotüp (MWCNT) ilaveli betonlar üzerinde birçok çalışma olması ile birlikte tek duvarlı karbon nanotüp (SWCNT)'lerin beton üzerinde davranışlarını inceleyen araştırmalar oldukça sınırlıdır. Bu çalışmada çimento ağırlığının % 0.0125, 0.020 ve 0.025 oranlarında SWCNT kullanılarak üretilen ultra yüksek performanslı çimentolu kompozitlerin (UHPC) mekanik ve elektriksel özellikleri araştırılmıştır. Hazırlanan 8 adet UHPC karışımlarının 4 tanesinde sadece SWCNT, 4 tanesinde ise SWCNT+ Mikro çelik fiber katılmıştır. UHPC karışımlarında mikro çelik lifler ağırlıkça %4 oranında kullanılmıştır. İletkenlik ve eğilme deneyleri 12 X 3 X 2 cm numuneler üzerinde gerçekleştirilmiştir. 28 günlük basınç dayanımları, 7 cm çapında ve 14 cm uzunluğunda silindirik numuneler kullanılarak belirlenmiştir. Elektriksel direnç ölçümü için çimentolu malzemelerin ölçümünde yaygın olan iki noktalı tek eksenli yöntem kullanılmıştır. Elde edilen sonuçlara göre SWCNT’nin UHPC’lerin mekanik özellikler üzerinde olumlu etkileri gözlenmiştir. SWCNT eklenmesi ve oranının artmasıyla elektriksel direnç azalmıştır, ancak gerçekleşen akım hızının artırılması için daha yüksek oranlarda SWCNT kullanılmasının gerekli olduğu tespit edilmiştir. Ayrıca mikro çelik lifli karışımlarda elektriksel direnç parametreleri üzerinde SWCNT’nin etkisi daha belirgin olduğu görülmüştür.

30 September 2024 in Journal of Sustainable Construction Materials and Technologies
Verified
Journal Article
Open access
PDF file
Serkan SubaşıSerkan Subaşı
Serkan Subaşı
DRDoğu Ramazanoğlu
Doğu Ramazanoğlu
MMMuhammed Marasli
Muhammed Marasli
VOVolkan Ozdal
Volkan Ozdal
YHYasemin Hatipoğlu
Yasemin Hatipoğlu
HDHeydar Dehghanpour
Heydar Dehghanpour
Magnetized water may act as a thickener in cementitious mixtures due to its slippery effect. Therefore, it can be beneficial for the mixture to settle easily and to improve its strength. This study investigated the effects of magnetized water passing through pipes with magnetic field intensity (MFI) 8 and 10 on glass fiber reinforced concrete (GFRC). Three different mixtures, the GFRC mixture produced with regular tap water, were obtained, and the properties of the produced GFRC samples, such as 7, 14, and 28 days H-Leeb hardness, density, Ultrasonic pulse velocity (UPV), flexural strength, compressive strength, and fracture mechanics were investigated. In addition, SEM, EDS, FTIR, and TGA analyses were carried out to investigate the change in surface tension in the internal structures of GFRCs produced with magnetized water. Overall, the results were promising. Results showed a proportional H-Leep hardness increase with curing time and density variations. Magnetized water reduced air voids, enhancing sound transmission speeds. Flexural and compressive strength improved with magnetic water. The study suggests significant contributions to energy savings and reduced production costs, highlighting the efficient use of energy resources.