20 February 2004 in Fatigue & Fracture of Engineering Materials & Structures
17 September 2004 in Fatigue & Fracture of Engineering Materials & Structures
25 January 2013 in Advanced Materials Research
In this work, the indentation size effect (ISE) in Vickers hardness tests of steel with selected heat treatments (annealed or tempered) has been investigated and analysed. Systematical hardness tests were performed within a commonly used micro-load range. The experimental data was analysed according to the Meyer power-law and the proportional specimen resistance (PSR) models and the link between ISE and material properties was discussed. The results showed that the experimental data fitted well with the Mayers power-law (P = A.dn) and the PSR (P/d = al + a2d) models. The ISE index (n) showed a good correlation with the hardness-elastic modulus ratio (H/E), which potentially could be used to predict the relative contributions of the elastic and plastic deformation contact area under indentation load and to normalize the hardness values for inverse material properties .
1 February 2012 in Computational Materials Science
15 August 2003 in Materials Science Forum
1 October 2006 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
The development of a new family of mouldable metastable composite materials has been demonstrated. Their special quality is derived from the ability to maintain the matrix as a supercooled liquid or gel whose solidification can be triggered mechanically, as desired, by a user. This article describes some aspects of the development work. In particular, the following are explained: the choice of matrix material; the use of additives to enhance the properties of the matrix; and the selection of reinforcement fibre. As part of the work, some mechanical testing was performed on several variations of a matrix-fibre pair and, to demonstrate the potential of such materials, some comparisons were made with a possible competitor material, a glass-reinforced urethane. It was shown that the metastable material could be formulated to provide mechanical properties that would make it suitable for applications such as orthopaedic casting, splinting and body armour, and in items of sports equipment, these being areas where its mouldability could be particularly desirable.