24 June 2024 in Scientific Reports
JCJennifer Cristhine Oliveira Cabral
Jennifer Cristhine Oliveira Cabral
KBKarine Feliciano Barbosa
DODaniel Emanuel Cabral de Oliveira
Daniel Emanuel Cabral de Oliveira
AAAdrielle Borges de Almeida
Adrielle Borges de Almeida
Generally, medicinal plants are harvested with high amount of water, so it is essential to subject the product to drying as soon as possible to prevent degradation before application. Most compounds from medicinal plants are sensitive to drying processes, so it is important to adjust the drying conditions. The objective of this study was to describe the drying of Rue (Ruta chalepensis L.) leaves, select the models that best fit each drying condition, determine the activation energy and thermodynamic properties of the leaves, and evaluate their quality after drying. Leaves were harvested with moisture content of 3.55 ± 0.05 kg water kg−1dry matter and subjected to drying at temperatures of 40, 50, 60 and 70 °C. Valcam model showed the best fit to represent the drying kinetics of Rue leaves at temperatures of 40 and 70 °C, and Midilli model proved to be better for the temperatures of 50 and 60 °C. Effective diffusion coefficient increased linearly with the increase in drying air temperature, and the activation energy was 60.58 kJ mol−1. Enthalpy, entropy and Gibbs free energy values ranged from 57.973 to 57.723 kJ mol−1, from − 0.28538 to − 0.28614 kJ mol−1 K−1 and from 147.34 to 155.91 kJ mol−1, respectively, for the temperature range of 40–70 °C. Drying air temperature promoted darkening or tendency to loss of green color; increase in drying air temperature leads to greater discoloration, as well as a higher concentration of total phenolic compounds (about 221.10 mg GAE mL−1 g–1 dm), with a peak at temperature of 60 °C.
1 August 2021 in Revista Brasileira de Engenharia Agrícola E Ambiental
Grain drying is a common process, due to its need for the maintenance of quality, but it is the activity with the highest energy demand among the postharvest stages. Thus, this study aimed to evaluate the effect of different tempering times on the energy efficiency of drying process and maintenance of cell membrane integrity of maize grains harvested with moisture content at 0.34 ± 0.01 d.b. The grains were dried in an experimental fixed-bed dryer with control of temperature and air flow conditions. The experiment was conducted in a completely randomized design with five tempering times (0, 4, 8, 12 and 16 hours) and four repetitions, where zero corresponds to continuous drying, while the remaining times correspond to the intermittent dryings. The grains were dried at the temperature of 100 ºC and air flow of 15.4 m3 min-1 t-1 until reaching moisture content of 0.16 ± 0.03 d.b. For intermittent drying, the process was interrupted with 0.22 ± 0.02 d.b. and restarted after the tempering time. The increase of tempering time led to reductions in effective drying time, specific energy consumption, electrical conductivity and damage and increase in the drying rate and overall energy efficiency. Intermittent drying reduced the drying time, being 30.25% more efficient than continuous drying.
2 June 2019 in Journal of Agricultural Science
WQWellytton Darci Quequeto
VSValdiney Cambuy Siqueira
EMElton Aparecido Siqueira Martins
Elton Aparecido Siqueira Martins
+5
As well as most agricultural products, some medicinal plants need to go through a drying process to ensure quality maintenance, however each product behaves differently. Therefore, the present study aimed to evaluate the drying kinetics of spiked pepper (Piper aduncum L.) leaves and determine their thermodynamic properties at different drying temperatures in laboratory scale. Leaves with initial moisture content of 78% w.b. (wet basis) were subjected to drying at temperatures of 40, 50, 60 and 70 ºC and air speed of 0.85 m s-1 in an experimental fixed bed dryer. The drying kinetics of the leaves was described by statistical fitting of mathematical models and determination of effective diffusion coefficient and activation energy. Enthalpy, entropy and Gibbs free energy were also evaluated for all drying conditions. It was concluded that, among the models evaluated, only Midilli and Valcam can be used to represent the drying of Piper aduncum leaves; the first for the two highest temperatures (60 and 70 ºC) and the second for 40 and 50 ºC. The activation energy was approximately 55.64 kJ mol-1, and the effective diffusion coefficient increase with the elevation of temperature. The same occurs with the values of Gibbs free energy, whereas the specific enthalpy and entropy decrease.
1 January 2020 in Ciência E Agrotecnologia
Buckwheat has become important in the food sector as its flour does not contain gluten. Since buckwheat is a relatively new crop in the agricultural environment, there is little information available regarding its processing. Drying is one of the most important post-harvest stages of buckwheat. The aim of the present study was to describe the drying process of buckwheat grains. Buckwheat grains with a moisture content of 0.41 ± 0.01 (dry basis, d.b.) were harvested, followed by drying in an experimental dryer at the temperatures of 40, 50, 60, 70, and 80 °C, at an air speed of 0.8 m s-1. The drying rate was determined, and the mathematical models generally employed to describe the drying process of several agricultural products were fitted to the experimentally obtained data. Model selection was based on the Gauss-Newton non-linear regression method and was complemented by Akaike Information Criterion and Schwarz’s Bayesian Information Criterion. It was concluded that the drying rate increased with an increase in temperature and decreased with an increase in drying time. It is recommended to use the Midilli model to represent the drying kinetics of buckwheat grains at the temperatures of 40, 60, and 70 °C, while the Approximation of diffusion model is recommended for the temperatures of 50 and 80 °C. The magnitudes of effective diffusion coefficients ranged from 1.8990 × 10-11 m2 s-1 to 17.8831 × 10-11 m2 s-1. The activation energy required to initiate the drying process was determined to be 49.75 kJ mol-1.
13 March 2024 in Food Science and Technology
Convective drying of mung bean seeds was conducted to investigate drying kinetics and mass transfer parameters at temperatures of 40, 50, 60, 70, and 80°C and a fixed air velocity of 1.2 m s-1. Drying characteristics were determined by drying rate, moisture ratio, diffusion coefficient, activation energy, Biot number, and mass transfer coefficient. Drying models such as Newton, Page, Henderson and Pabis, Logarithmic, Midilli, Two-term, and Diffusion approximation were applied and fitted to the moisture ratio of the experimental data. The drying rate was significantly affected by the drying temperature. The Midilli model was considered the most suitable for experimental drying curves. The effective moisture diffusivity ranged from 3.19×10-9 to 10.76×10-9 m2 s-1, with an activation energy of 59.78 kJ mol-1. Similar to the mass transfer coefficient, the Biot number increased with increasing drying temperature. The simultaneous transfer of heat and mass was controlled by diffusion and surface.