Hydraulic selection is a key feature of aerobic granular sludge (AGS) systems but existing aerobic granular sludge (AGS) models neglect those mechanisms: gradients over reactor height (Hreactor), selective removal of slow settling sludge, etc. This study aimed at evaluating to what extent integration of those additional processes into AGS models is needed, i.e., at demonstrating that model predictions (biomass inventory, microbial activities and effluent quality) are affected by such additional model complexity. We therefore developed a new AGS model that includes key features of full-scale AGS systems: fill-draw operation, selective sludge removal, distinct settling models for flocs/granules. We then compared predictions of our model to those of a fully mixed AGS model. Our results demonstrate that hydraulic selection can be predicted with an assembly of four continuous stirred tank reactors in series together with a correction code for plug-flow. Concentration gradients over the reactor height during settling/plug-flow feeding strongly impact the predictions of aerobic granular sludge models in terms of microbial selection, microbial activities and ultimately effluent quality. Hydraulic selection is a key to predict selection of storing microorganisms (phosphorus-accumulating organisms (PAO) and glycogen-accumulating organisms (GAO)) and in turn effluent quality in terms of total phosphorus, and for predicting effluent solid concentration and dynamic during plug-flow feeding.
The removal or degradation of particulate organic matter is a crucial part in biological wastewater treatment. This is even more valid with respect to aerobic granular sludge and the impact of particulate organic matter on the formation and stability of the entire granulation process. Before the organic part of the particulate matter can be hydrolyzed and finally degraded by the microorganism, the particles have to be transported towards and retained within the granulated biomass. The understanding of these processes is currently very limited. Thus, the present study aimed at visualizing the transport of particulate organic matter into and through an aerobic granular sludge bed. Magnetic Resonance Imaging (MRI) was successfully applied to resolve the different fractions of a granular sludge bed over time and space. Quantification and merging of 3D data sets allowed for a clear determination of the particle distribution within the granular sludge bed. Dextran coated super paramagnetic iron oxide nanoparticles (SPIONs, = nm) served as model particles for colloidal particles. Microcrystalline cellulose particles ( = 1-20 μm) tagged with paramagnetic iron oxide were applied as a reference for toilet paper, which is a major fraction of particulate matter in domestic wastewater. The results were supplemented by the use of real wastewater particles with a size fraction between 28 and 100 μm. Colloidal SPIONs distributed evenly over the granular sludge bed penetrating the granules up to 300 μm. Rinsing the granular sludge bed proved their immobilization. Microcrystalline cellulose and real wastewater particles in the micrometer range accumulated in the void space between settled granules. An almost full retention of the wastewater particles was observed within the first 20 mm of the granular sludge bed. Moreover, the formation of particle layers indicates that most of the micrometer-sized particles are not attached to the biomass and remain mobile. Consequently, these particles are released into the bulk phase when the granulated sludge bed is resuspended.