Polysulfone (PSF)-based mixed-matrix membranes (MMMs) were developed through incorporation by solvent casting of poly(ethylene glycol)-grafted carbon nanotubes (PEG-g-CNTs) into the polymer matrix. Single-gas permeability and the respective perm-selectivity values of the resulting MMMs for CO2, CH4, and N2 along with mixed-gas selectivities were determined at various temperatures and pressures. The performance was further analyzed by obtaining gravimetrically gas adsorption isotherms and interpreting the results to determine the solubility and diffusivity coefficients of the prepared membranes. Simultaneous improvement in CO2 permeability, selectivity, and mechanical robustness was achieved. Indicatively, an increase in CO2 permeability by 52.4% at 1.5 bar was discerned for the MMM containing 5 wt % PEG-g-CNTs along with enhancements of 81 and 74% in CO2/N2 and CO2/CH4 perm-selectivities, respectively, while an up to 43.4% increase in tensile modulus and a 12.5% increase in tensile strength were achieved as well. This performance, in conjunction with the stability of the fillers, and the low cost, structural stability, and commercial availability of the polymer make the PSF/PEG-g-CNT MMM a promising base case for developing industrially relevant CO2 separation membranes.
2 May 2022 in Industrial & Engineering Chemistry Research
The presence of elemental mercury in wellhead natural gas is an important industrial problem, since even low levels of mercury can damage cryogenic aluminium heat exchangers and other plant equipment. Mercury present in the natural gas stream will also dramatically shorten the useful life of precious metal catalysts. The present work reviews the overall process of elemental mercury removal in practice using non-regenerative adsorbents (e.g. sulfur-impregnated porous carbon), addressing the various influencing parameters such as the method of sulfur impregnation, the impregnation temperature, the sulfur to carbon ratio, the impregnation time, the impact of flue gas constituents, the effect of processing temperature, and the nature of any carbon-containing functional groups present. The distribution of elemental sulfur is found to be the key to developing an effective adsorbent, rather than quantity of sulfur impregnated. Modifying or developing an adsorbent for elemental mercury removal from natural gas needs a detail physical and chemical characteristics assessment of the adsorbent.
1 February 2023 in ACS Applied Engineering Materials