1 January 2018 in Physics of Fluids
The flow in a shock tube is extremely complex with dynamic multi-scale structures of sharp fronts, flow separation, and vortices due to the interaction of the shock wave, the contact surface, and the boundary layer over the side wall of the tube. Prediction and understanding of the complex fluid dynamics are of theoretical and practical importance. It is also an extremely challenging problem for numerical simulation, especially at relatively high Reynolds numbers. Daru and Tenaud [“Evaluation of TVD high resolution schemes for unsteady viscous shocked flows,” Comput. Fluids 30, 89–113 (2001)] proposed a two-dimensional model problem as a numerical test case for high-resolution schemes to simulate the flow field in a square closed shock tube. Though many researchers attempted this problem using a variety of computational methods, there is not yet an agreed-upon grid-converged solution of the problem at the Reynolds number of 1000. This paper presents a rigorous grid-convergence study and the resulting grid-converged solutions for this problem by using a newly developed, efficient, and high-order gas-kinetic scheme. Critical data extracted from the converged solutions are documented as benchmark data. The complex fluid dynamics of the flow at Re = 1000 are discussed and analyzed in detail. Major phenomena revealed by the numerical computations include the downward concentration of the fluid through the curved shock, the formation of the vortices, the mechanism of the shock wave bifurcation, the structure of the jet along the bottom wall, and the Kelvin-Helmholtz instability near the contact surface. Presentation and analysis of those flow processes provide important physical insight into the complex flow physics occurring in a shock tube.
27 September 2013 in Journal of Turbomachinery
1 February 2018 in Physics of Fluids
Detailed particle-image-velocimetry (PIV) and surface pressure measurements are presented to study the vortex flow behind a slender conical forebody at high angles of attack. The results confirm the existence of two randomly appearing mirror imaged asymmetric bi-stable states of the separation vortices, giving rise to large side force and moment. A pair of carefully designed dielectric barrier discharge plasma actuators mounted near the apex and on both sides of the conical body are used to manipulate the vortex flow and thus provide control of the side forces on the body without using flaps. By making use of a duty-cycle actuation scheme that alternately actuates the port and starboard plasma actuators and optimizing the duty-cycle frequency, the present work demonstrates the feasibility of achieving a nearly perfect linear proportional control of the side force and moment in response to the duty-cycle ratio. Phase-locked PIV and surface pressure measurements are used to study the unsteady dynamic evolution of the flow within one duty-cycle actuation to reveal the flow control mechanism. It is found that under the duty-cycle actuation with the optimized frequency, the vortex flow essentially follows the plasma actuation by alternating between the two bi-stable states controlled directly by the duty-cycle ratio.
27 September 2010 in Journal of Turbomachinery
18 August 2005 in Computers & Fluids
1 December 2021 in Physics of Fluids
Navier–Stokes computations are performed, and detailed results are documented on the vortex shedding, lift and drag fluctuations, and their spectra for flow past a square cylinder with the Reynolds number ranging from 1 to 300. A body force model for the dielectric barrier discharge (DBD) plasma actuator is used in the Navier–Stokes computations to study the effectiveness of flow control by a pair of the DBD actuators. Three installation configurations of the actuators are investigated. The effects of the actuator location, actuator input power, and the flow Reynolds number are studied. In the first case, two actuators have been installed on the top and bottom of the cylinder. In the second case, two actuators are installed on the front surface. In the last case, two actuators are installed on the rear surface. It is discovered that the best flow control effect is achieved in the last case. Both the unsteady vortex shedding and the average drag can be significantly reduced by the plasma actuators. Under best conditions, the vortex shedding in the wake can be completely suppressed.