1 February 2019 in Journal of Materials in Civil Engineering
Significant amounts of blast furnace slag (BFS) are generated daily as by-product from iron and steel industries. This waste material usually has interesting physical properties and mineralogical and chemical composition, which can be useful as granular aggregate in the production of hot mix asphalt (HMA). In this study, an experimental program was designed to evaluate the effect on the resistance of a HMA due to the replacement (in mass and volume) of the coarse fraction of a natural aggregate (type limestone; LS) by a BFS. Total aggregate replacement was also evaluated. The mechanical properties were evaluated by carrying out the following tests: Marshall stability, indirect tensile strength (ITS), Cantabro abrasion, resilient modulus, permanent deformation, and fatigue resistance. Water sensitivity or moisture damage was evaluated by determining the ratio of indirect tensile strength (TSR) in wet and dry conditions. X-ray diffractometry (XRD), X-ray fluorescence (XRF) tests, and imaging processing in a scanning electron microscope (SEM) were carried out on particles of LS and BFS. The results revealed a remarkable enhancement in the properties of the HMA mixture when the coarse fraction of the LS was replaced in volume by BFS. When such a replacement was made in mass, the adhesive properties of the asphalt-aggregate system worsened. Total replacement of the LS led to unsatisfactory mechanical behavior.
1 January 2006 in Road Materials and Pavement Design
The behavior of asphalt binders modified with recycled crumb rubber depends on several factors, such as: rubber content and type, temperature and time employed during the digestion process. Some of these aspects are investigated in this paper by means of a series of tests performed on asphalt-rubber produced via the wet process. Crumb rubber manufactured by ambient grinding and cryogenic processes were used in this work. Reduction of penetration and sharp increase of viscosity, softening point and resilience were observed for increasing rubber contents. The results show that the Brookfield viscosity limits the crumb rubber content incorporated into straight binder, once it tends to become too high above a certain critical amount of incorporated rubber. The effect of digestion time on the viscosity of the modified binders depended in this research on the rubber content. For high rubber contents, there seems to exist a critical time after which viscosity tends to decrease for continuing digestion process. A rubber-binder interaction model, which could explain such results, is proposed. The influence of rubber type occurred especially in terms of Brookfield viscosity and softening point. It was observed a decrease in these properties for the asphalt-rubber binders produced with crumb rubber obtained by cryogenic process in relation to those produced by the grinding process.
1 March 2019 in Computer Methods in Applied Mechanics and Engineering
1 October 2018 in Journal of Materials in Civil Engineering
Blast furnace slags (BFS) have interesting physical properties and chemical compositions for the production of mastics in asphalt mixtures. However, most of the studies conducted on this material and their applications in asphalt mixtures have been as substitutes for the coarse fraction of natural aggregates (NGA). In the present study, an experimental program was devised to evaluate the effect on the resistance of a hot mix asphalt (HMA), due to the replacement of fine fraction of a NGA by a BFS. The mechanical properties investigated were indirect tensile strengths, resilient modulus, permanent deformation, resistance to fatigue, and moisture damage. Analysis of variance (ANOVA) tests were performed to verify or reject the null hypothesis that the results are statically equal to those of the reference mixture. X-ray diffractometry (XRD) and X-ray fluorescence (XRF) tests were carried out on particles of BFS and NGA. Additionally, the samples were subjected to imaging processing in a scanning electron microscope (SEM). Characterization tests (viscosity, softening point, penetration, and indirect tension) were performed on mixtures made of fine particles (NGA and BFS) and asphalt. The BFS used as fine aggregate tends to generate, in conjunction with asphalt, a material with improved properties of resistance under monotonic and dynamic load.
1 May 2020 in Journal of Materials in Civil Engineering
JRJuan Carlos Ruge-Cárdenas
Juan Carlos Ruge-Cárdenas
JBJuan Gabriel Bastidas-Martínez
Juan Gabriel Bastidas-Martínez
MVMichael Yesid Velandia-Castelblanco
Michael Yesid Velandia-Castelblanco
Clays and clay minerals are widely used as raw materials in different industrial processes due to their abundance. Generally, in road construction projects, clays are considered waste materials because they have some undesirable engineering properties (e.g., plasticity and swelling properties). For this reason, this material is generally discarded in landfills or dumps. However, taking advantage of its abundance, this material could be used as a substitute for natural aggregates of hot mix asphalt (HMA) production as long as their undesirable properties are eliminated. In this study, a bentonite was thermally treated (subjected to high temperatures) in order to be used as replacement for the total filler content of a natural aggregate in HMA. X-ray diffractometry (XRD), X-ray fluorescence (XRF), Atterberg limits, and free swelling index tests were carried out on bentonite (with and without thermal treatment). Marshall, indirect tensile strength (ITS) (under dry and wet conditions), resilient modulus, permanent deformation, resistance to fatigue, and Cantabro tests were carried out on HMA mixtures using thermally treated bentonite (BT) as filler. On all test results an ANOVA test was carried out. When BT replaced the total fraction of the natural filler, its resistance under monotonic load, stiffness under cyclic loading, and resistance to moisture damage increased remarkably. A similar resistance to fatigue and abrasion in the Cantabro test was observed. Based on the results obtained, BT could be considered a technically viable alternative as a substitute material for natural fillers in HMAs.
1 January 2005 in Soils and Foundations
Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies