Ti/SnO2-Sb electrode, which is one of the dimensionally stable anode (DSA) electrodes, offers high specific conductivity, excellent electrocatalytic performance, and great chemical stability. For these reasons, Ti/SnO2-Sb electrode has been extensively studied in the fields of wastewater treatment. This review covers essential research work about the advanced oxidation technology and related DSA electrodes. It gives an overview of preparation methods of SnO2 electrodes, including sol-gel method, dip-coating method, electrodeposition method, chemical vapor deposition method, thermal decomposition method, magnetron sputtering method, and hydrothermal method. To extend service life and improve electrocatalytic efficiency, the review provides comprehensive details about the modification technologies of Ti/SnO2-Sb electrode, such as doping modification, composite modification, and structural modification. In addition, the review discusses common problems in industrial applications of Ti/SnO2-Sb electrode and highlights the promising outlook of Ti/SnO2-Sb electrode.
20 February 2017 in Journal of the American Ceramic Society
Steam oxidation of silicon carbide (SiC) layer in nuclear fuel particles were performed in flowing argon‐water vapor mixture with a total pressure of 1 bar at 1173‐1673 K. Both the phase composition and the microstructure of the oxide scale on the SiC layer varied with the oxidation temperature. Reaction rates of water vapor with the SiC layer were determined by measuring the oxide scale thickness. It was found that the oxidation of SiC layer follows the parabolic law. The activation energy was calculated to be 103±11 kJ /mol. It is proposed that the rate determine step of the oxidation is the diffusion of water vapor molecules in the oxide scale. The fracture strength of SiC shell after steam oxidation was evaluated using a crush test. The fracture strength decreased with the increase in the oxidation temperature due to the thinning of the SiC layer.
In a high-temperature gas-cooled reactor, the integrity of tristructural-isotropic-(TRISO-) coated fuel particles ensures the safety of the reactor, especially in case of an air-ingress accident. The oxidation of TRISO particles with the outer layers of silicon carbide (SiC) was performed at temperatures of 900°C–1400°C in air environment. Both the microstructure and phase composition of the SiC layers were studied. The results showed that the SiC layers had a good oxidation resistance below 1100°C. However, the amorphous silica on the SiC layers formed at 1200°C and gradually crystallized at 1400°C with the presence of microcracks. The reaction rates of the SiC layers were determined by measuring the silica thickness. It was proposed that the oxidation of the SiC layers followed the linear-parabolic law with the activation energy of 146 ± 5 kJ/mol. The rate-determining step of the oxidation was the diffusion of oxygen in silica.
9 March 2022 in International Journal of Modern Physics B