22 March 2024 in International Journal for Numerical Methods in Engineering
In the contribution at hand, a new formulation for finite strain viscosity relative to the viscous intermediate configuration is presented. The evolution of the viscous deformations is based upon a new numerical approach, which allows for a consistent consideration of anisotropic finite strain viscoelasticity, according to the authors knowledge. A standard Maxwell model is used to describe viscous behaviour at finite deformations. Furthermore, the orthotropic Yeoh material model is extended to include a distinction between behaviour under tensile and compression loading. The proposed formulation is validated, and parameters of the model are identified by material tests on Sorghum bicolor plants. Subsequently, numerical examples are shown to demonstrate the capabilities of the model. In general, the proposed Yeoh material formulation is shown to accurately represent the inability of fibres to carry compression loading. Furthermore, the viscoelastic approach, developed relative to the viscous intermediate configuration, is demonstrated to be capable of producing plausible results. Additionally, the mechanical behaviour of Sorghum bicolor plants is simulated using the introduced formulation. The results show that the contribution at hand describes a novel methodology to simulate the viscoelastic behaviour of plant materials reliably.
10 September 2023 in Proceedings in Applied Mathematics and Mechanics
The dynamic response of long structures (e.g., pavements) subjected to moving loads is generally difficult to simulate using conventional methods like the finite element method in the Lagrangian setting. This is because the entire length of the structure in the path of the moving load would need to be discretized, and in turn would require large meshes. Additionally, if improvement in quality of results through the use of finer mesh sizes is sought, the entire region of the mesh in the load path would require refinement. As a direct result, long simulation run‐times can be expected when using conventional methods. To overcome these drawbacks, and improve the efficiency of the finite element simulations, the Arbitrary Lagrangian Eulerian (ALE) approach can be used to simulate pavement structures, provided longitudinal homogeneity is assumed. This contribution uses an extension of the quasi‐static ALE framework to the transient domain, enabling the study of the dynamic response of pavement structures subjected to moving loads. In this work, some case studies are considered to highlight the capabilities of this dynamic ALE framework.
28 December 2025 in International Journal for Numerical Methods in Engineering
Fast and efficient simulation strategies are a basic requirement of technologies such as digital twins. Particularly for roadway infrastructure, recent developments have demonstrated that the arbitrary Lagrangian Eulerian (ALE) formulation can be utilized to improve computational efficiency, when simulating the response of such pavement structures subjected to moving loads. It is also well‐established in literature, that model order reduction (MOR) techniques significantly enhance calculation speed. This contribution details the combination of both these tools into a novel model order reduced arbitrary Lagrangian Eulerian (MORALE) formulation. Both hyperelastic and viscoelastic material models are considered in this work. Transient simulations of pavement structures subjected to moving loads are then carried out with the developed framework, and these show a significant enhancement in computational speed and efficiency over conventional simulation techniques. Also in this work, a comprehensive breakdown of the computational costs involved in using the MORALE formulation is provided and analysed. Such an efficient and fast simulation framework is of vital importance in technologies such as digital twins of roadway infrastructure (like pavements), as it enables engineers to quickly run what‐if analyses and make informed decisions about the management of the structure under consideration.
20 November 2025 in International Journal for Numerical Methods in Engineering
The study at hand investigates the applicability of experimental data within a model‐free data‐driven solver. The heat conduction equation is facilitated and solved by the data‐driven solver without the need for a constitutive law. At first, the results of an artificially created dataset are compared to a finite element solution to assess the quality of the approach. Subsequently, in‐situ data is processed to create a dataset for the data‐driven solver. This approach is validated by comparison to experimental data. The quality of the measured data is discussed, and challenges arising in utilizing experimental data are pointed out. Furthermore, an improved measuring concept for future experimental data is detailed and tested based on finite element simulations. Another finding is the ability of the data‐driven solver to implicitly model changing material characteristics.
26 November 2025 in Mechanics Research Communications