10 January 2020 in Science Advances
Droplet nucleation and condensation are ubiquitous phenomena in nature and industry. Over the past century, research has shown dropwise condensation heat transfer on nonwetting surfaces to be an order of magnitude higher than filmwise condensation heat transfer on wetting substrates. However, the necessity for nonwetting to achieve dropwise condensation is unclear. This article reports stable dropwise condensation on a smooth, solid, hydrophilic surface (θa = 38°) having low contact angle hysteresis (<3°). We show that the distribution of nano- to micro- to macroscale droplet sizes (about 100 nm to 1 mm) for coalescing droplets agrees well with the classical distribution on hydrophobic surfaces and elucidate that the wettability-governed dropwise-to-filmwise transition is mediated by the departing droplet Bond number. Our findings demonstrate that achieving stable dropwise condensation is not governed by surface intrinsic wettability, as assumed for the past eight decades, but rather, it is dictated by contact angle hysteresis.
8 November 2016 in Journal of Materials Chemistry A
In this work, building on the principles of adhesion mechanics, we developed novel inexpensive, environmentally benign, non-corrosive PDMS gels that offer ultra-low adhesion to ice as well as outstanding mechanical durability. We elucidated the mechanism of separation of ice from our PDMS gels via separation pulses. We envision that our durable PDMS gels with ultra-low ice adhesion strength as well as the improved understanding of the separation mechanism will enable universal deicing design strategies in aviation, maritime, power, automotive, and energy sectors.
14 July 2016 in ACS Applied Materials & Interfaces
2 November 2018 in Science Advances
When two liquid droplets coalesce on a superrepellent surface, the excess surface energy is partly converted to upward kinetic energy, and the coalesced droplet jumps away from the surface. However, the efficiency of this energy conversion is very low. In this work, we used a simple and passive technique consisting of superomniphobic surfaces with a macrotexture (comparable to the droplet size) to experimentally demonstrate coalescence-induced jumping with an energy conversion efficiency of 18.8% (i.e., about 570% increase compared to superomniphobic surfaces without a macrotexture). The higher energy conversion efficiency arises primarily from the effective redirection of in-plane velocity vectors to out-of-plane velocity vectors by the macrotexture. Using this higher energy conversion efficiency, we demonstrated coalescence-induced jumping of droplets with low surface tension (26.6 mN m−1) and very high viscosity (220 mPa·s). These results constitute the first-ever demonstration of coalescence-induced jumping of droplets at Ohnesorge number >1.
9 May 2017 in Advanced Materials
23 July 2020 in Environmental Science & Technology