The reconfigurable intelligent surface (RIS) technology is a potential solution to enhance network capacity and coverage without significant investment into additional infrastructure in 6G networks. This work highlights the interest of the mobile communication industry on RIS, and discusses the development of liquid crystal-based RIS for improved energy efficiency and coverage in the millimeter-wave band. Furthermore, the paper discusses perspectives and insights from an industry R&D point of view, addressing relevant use cases, technical requirements, implementation challenges, and practical considerations for RIS deployment optimization in the context of 6G networks. A hardware design of a RIS with liquid crystal at 28 GHz is presented. A propagation model for RIS as a new part in the system architecture is discussed with the approaches of semi-empirical models, geometric models and its combination by the application of artificial intelligence / machine learning. Finally, a channel model for deployment optimization and dimensioning is presented with the findings that rather large RIS is in favor for coverage improvement as well as a greater attenuation at higher frequencies combined with a smaller RIS size.
26 March 2026 in IEEE Transactions on Instrumentation and Measurement
Accurate temperature-dependent dielectric data of liquid crystal (LC) materials in the sub-6 GHz range are essential for the reliable design of reconfigurable RF components, yet available data are often limited to room temperature, different frequency ranges, or both. To address this gap, this paper presents the temperature-controlled dielectric characterization of an LC material at 3.5 GHz using a resonant measurement method, specifically a rectangular hollow waveguide resonator. The characterized LC is contained in a quartz tube, and temperature control is achieved through a dedicated cooling and heating system, enabling measurements between −50 °C and 120 °C. The dielectric properties are extracted based on cavity perturbation theory. To validate the measurement setup, 1-Butanol is characterized and compared with literature data. The LC mixture GT7-29001 exhibits an anisotropic relative permittivity with values of 3.65 and 2.60 for the parallel and orthogonal orientations, respectively, at 20 °C. The loss tangent is 0.0097 and 0.0264 in the respective orientations. An uncertainty analysis quantifies errors from resonance frequency determination, quality factor extraction, and temperature stability. These results provide design-relevant material data and a validated measurement workflow towards LC-based sub-6 GHz components operating in a wide temperature range.