1 March 2021 in Acta Materialia
15 December 2022 in Journal of Applied Physics
The dynamic stress–strain response of a material can be described by a number of different models of varying fidelity. However, an individual model’s ability to replicate the dynamic stress–strain response of a material can be hindered by experimental variability. Reification, an approach to fusing models and experimental data with inherent scatter, is presented. It is then used to determine the optimum parameters of the Johnson–Cook (JC) and Zerilli–Armstrong (ZA) models using a fusion of Split-Hopkinson Pressure Bar (SHPB) data and the JC and ZA models fit to the SHPB data using a traditional approach. The output of the fused model is a dataset that represents a “best-guess” sampling of the possible stress–strain response of a high strength steel. In the present work, the dynamic response of a newly developed steel, AF9628, is evaluated. Under the reification framework, the experimental variability and limitations of the mathematical model expressions are addressed by the optimized sampling of data and combined fitting process. The JC and ZA models are then re-fit to partitions of the fused dataset, which bound the responses of the traditionally fit JC and ZA models. The behavior of the re-fit models and the traditionally fit models are compared via a simulated Taylor anvil test.
20 September 2022 in Frontiers in Materials
In computational materials research, uncertainty analysis (more specifically, uncertainty propagation, UP) in the outcomes of model predictions is essential in order to establish confidence in the models as well as to validate them against the ground truth (experiments or higher fidelity simulations). Unfortunately, conventional UP models relying on exhaustive sampling from the distributions of input parameters may be impractical, particularly when the models are computationally expensive. In these cases, investigators must sacrifice accuracy in the propagated uncertainty by down-sampling the input distribution. Recently, a method was developed to correct for these inaccuracies by re-weighing the input distributions to create more statistically representative samples. In this work, the method is applied to computational models for the response of materials under high strain rates. The method is shown to effectively approximate converged output distributions at a lower cost than using conventional sampling approaches.