The paper demonstrates the prospects of using an approach for calculating adsorption isotherms of gases on micropore industrial zeolites based on the example of H2, CO2, CO, CH4, N2 adsorption on 13X and 5A zeolites using the Dubinin–Radushkevich–Astakhov (DRA) equation. Experimental adsorption isotherms of H2, CO2, CO, CH4, N2 gases on 13X and 5A zeolites of various manufacturers have been obtained, as well as ranges of the limiting adsorption volume and characteristic adsorption energy have been established. It made it possible to correctly calculate isotherms using the DRA equation in the temperature range 293–323 K and pressure range 0–30 atm. The paper proposes and solves the optimization problem of determining affinity coefficients, which allows the calculation of gas adsorption isotherms on zeolites using only one experimental isotherm of standard gas N2. The mismatch between the experimental isotherms and those calculated by the DRA equation is 14.69% for H2 (maximum) and 1.81% for CO2 (minimum). This approach makes it possible to significantly reduce the number of necessary expensive experiments in comparison with the traditional approach (using the Langmuir equations or equations derived from it), at the same time providing acceptable accuracy for practice.
26 July 2021 in Chemical Product and Process Modeling
The complexity of the pressure swing adsorption (PSA) mathematical model, the need for its multiple calculations to reach the cyclic steady state and a large number of functional dependencies lead to unstable numerical circuits, physically unrealistic oscillations in adsorption profiles, an increase in the calculation time, and the failure of the solver. The paper proposes an approach to optimizing the calculation process, which consists in finding a reasonable balance between the completeness of the PSA mathematical model and the accuracy of the results obtained. The effectiveness of the approach is demonstrated on the example of air oxygen enrichment and hydrogen recovery from synthesis gas. The gas separation processes were simulated for the two-adsorber PSA unit with a granulated 13X adsorbent. The effect of the changes in the model coefficients on its accuracy in the operating range of input variables is investigated. A distinctive feature of this study is the recommendations for choosing a set of the model equations to calculate the PSA processes which are particularly relevant when solving optimization problems with uncertainty. The productivity, cycle duration, the diameter of the adsorbent particles and the flow rate, at which it is advisable to use the isothermal and external diffusion reduced PSA model in the calculations, are established, which will save at least 24.3 and 47.1% of the CPU time with a small loss in accuracy. The proposed approach can be used to form a set of equations for the PSA, rPSA, ultra rPSA, VSA, VPSA models, separation of various gas mixtures on various adsorbents.
1 January 2020 in Bulletin of the South Ural State University. Series "Mathematical Modelling, Programming and Computer Software"
The paper proposes an approach to the optimal design of pressure swing adsorption (PSA) units for hydrogen recovery under uncertainty, which provides a reasonable margin of the potential resource of the PSA hydrogen unit and compensates for the negative impact of a random change in uncertain parameters within specified limits. A heuristic iterative algorithm is proposed to solve the design problem with a profit criterion, which is guaranteed to provide the technological requirements for the PSA unit, regardless of the values that take uncertain parameters from the specified intervals of their possible change. An experimental verification of the approach with the root-mean-square error of 19.43 % has been carried out. Optimization problems of searching for a combination of mode and design parameters under uncertainty for a range of 4-bed 4-step VPSA units with a capacity of 100–2000 L/min STP have been solved taking into account the requirements for hydrogen purity of 99.99+ %, gas inlet velocity of 0.2 m/s, and bed pressure drop (no more than 1 atm). It has been established that taking into account uncertainties leads to an increase in energy costs by 8–10 %, a decrease in profit by 10–15 %, and a decrease in hydrogen recovery by 4–5 %, which is a payment for the uninterrupted operation of the PSA unit. The effect of uncertain parameters (percentage composition of the gas mixture; gas temperature; the diameter of adsorbent particles) on the key indicators of the PSA process (recovery, profit, hydrogen purity, unit capacity) has been established and trends in adsorption duration, adsorption and desorption pressure, P / F ratio, valve capacity, bed length, adsorber diameter for design of hydrogen PSA unit, which are necessary for subsequent design and scaling of units.
1 January 2021 in Image Journal of Advanced Materials and Technologies
Methodology for creating and studying technological processes and resource-saving units for adsorption separation and purification of gas mixtures (atmospheric air, synthesis gas) with cyclically changing pressure was developed. A problem-oriented hardware-software complex designed to study the properties and operation regimes of units for adsorption separation of gas mixtures and extraction of product gases was created. The complex can also be used to prepare initial data for the design of industrial units for separation and purification of gas mixtures by the method of pressure swing adsorption. The coefficients of mass transfer and mass conductivity in the adsorbent were calculated for the processes during adsorption and desorption of the adsorptive (nitrogen, oxygen, carbon dioxide and monoxide, hydrogen) using experimentally obtained kinetic curves, and the adequacy of mathematical models was established. Using the hardware-software complex, experimental and numerical studies of technological processes for extraction of product gases (oxygen and hydrogen with a purity of 45 to 95.5 vol.%, from 99 to 99.99 vol.%, respectively), the effect of mass and heat exchange processes and operating variables (“adsorption-desorption” cycle time, pressure at the adsorption step), disturbing influences (composition and temperature of the initial gas mixture) on the performance indicators of the pressure swing adsorption unit were carried out.
1 January 2021 in Bulletin of the South Ural State University. Series "Mathematical Modelling, Programming and Computer Software"