This study was conducted to evaluate the effects of plant ash based ammonia stripping process on removal and recovery of ammonia-nitrogen (NH3-N) in biogas slurry (BS), in order to provide theoretical reference for the feasibility of plant ash, as replacement of sodium hydroxide. The best mixing ratio of plant Ash and biogas slurry, gas-liquid ratio, stripping time and stripping temperature was also determined to optimize the process. The results showed that the (NH3-N) removal rate was 85.27% and the recovery rate was 76.45%, at 10:2 biogas slurry and plant ash mixing ratio, the gas-liquid ratio of 2000, the stripping temperature of 30ºC and the stripping time of 2 h. Compared with sodium hydroxide as stripping promoter the removal rate and recovery rate of ammonia nitrogen in biogas slurry were increased by 4.15% and 6.49% respectively, and the operation cost of ammonia nitrogen stripping process was reduced by plant ash replacing sodium hydroxide. The comprehensive analysis suggested that it is feasible to combine the plant ash with biogas slurry to remove ammonia nitrogen.
Facing the severe environmental challenge of massive red mud (RM) stockpiles, iron extraction research is accelerating from traditional pyrometallurgy and other conventional processes toward green low-carbon, multi-source synergistic, and total-component high-value utilization approaches—a transition that continues to evolve. This review systematically examines three frontiers: green reduction technologies, synergistic valorization via waste-treating-waste, and integrated cascading strategies for total-component high-value utilization. Evaluation focuses on the principles, advantages, and challenges of biomass reduction, hydrogen metallurgy, selective flocculation, advanced heating techniques, co-processing with other solid wastes, and multi-metal cascading extraction. Evidence suggests that future RM iron extraction technology lies in establishing cross-industry circular economy networks, transforming RM from a singular waste into a resource hub linking aluminum, steel, and construction industries to maximize environmental and economic benefits.
Iron oxides play an important role in regulating global biogeochemical cycles, yet how their physicochemical properties influence community structure, function, and assembly remains poorly understood. Here, we investigated the effects of four representative iron oxides—ferrihydrite (Fh), goethite (Gt), haematite (Ht), and magnetite (Mt)—serving as terminal electron acceptors on microbial communities enriched from activated sludge. Metagenomic profiling revealed mineral‐dependent divergence in community composition and functional potential. The communities developed on amorphous Fh demonstrated low microbial diversity and were heavily dominated by Pseudomonas _A. In contrast, the communities associated with crystalline oxides (Gt and Ht) maintained intermediate diversity. Notably, the Mt. communities exhibited a more polycentric structure, possessing the highest richness and evenness, alongside a significant enrichment of Geobacter . Methane was detected in crystalline‐oxide systems but remained below detection in Fh systems. Mineralogical analyses revealed substantial Fe(III) reduction and secondary mineral formation across treatments. Null‐model analysis of pairwise turnover supports mineral‐associated community turnover while highlighting that the relative contributions of selection versus undominated processes vary among minerals. Overall, these findings demonstrate that iron oxide identity is associated with differences in anaerobic community structure and biogeochemical outcomes.