10 November 2016 in Materials and Manufacturing Processes
The inherent doping of residual carbon during the preparation of Y2BaCuO5 (Y211) inclusions would degrade the physical and mechanical performance of the Y1Ba2Cu3O7-x (Y123) superconducting matrix. Y211 precursor powders were prepared by the oxalate coprecipitation process in this study. Residual carbon contents of Y211 powders under different heat treatment processes were studied by the high-frequency combustion infrared absorption method. The residual carbon content of Y211 reached the current best level ∼0.012% when calcined in O2 flow at 950°C for 20 h. Y211 powders with the lowest carbon content were used to prepare a small batch of melt-textured Y123/Y211 composites. All samples were single-domain crystals without macro defects, which were usually caused by the emission of CO2. Among them, one sample (Ø27 mm × 14 mm) has a maximum levitation force of 71 N (77 K, 0.5 T), with critical current density Jc of 3.2 × 108 A/m2 (77 K, 0 T).
13 November 2013 in Physica C: Superconductivity and its Applications
1 September 2016 in Cryogenics
27 June 2016 in IEEE Transactions on Applied Superconductivity
Three YBCO bulk superconductors with different critical current densities are used to investigate the magnetic force of a simple superconductor-magnet system under different relative speed values between YBCO and a magnet. The initial cooling processes for superconductors include zero field cooled (ZFC) and field cooled (FC). Crossing phenomena can be observed both in force-displacement hysteresis curves of superconductors with high and very low critical current densities. The maximum repulsive force under different relative speed values is analyzed. For the high-performance superconductor, the ZFC maximum repulsive force increases at first and reaches a peak value and then decreases with the increase of relative speed. When the magnet reaches 0.1 mm above the minimum clearance and its speed is changed to 0.1 mm/s for 1 s, the levitation force increases a lot at first and then decreases during this very slow approaching process to the minimum clearance. Based on the experimental results and analysis, the crossing phenomena reflect the effect of vortex dynamic and are directly related to the flux balance between trapped magnetic field and flux creep.
7 December 2017 in Physica C: Superconductivity and its Applications