Vanadis 4 Extra SuperClean, a high-carbon cold-work tool steel, was processed by Electron Beam Melting (EBM) and subsequently subjected to standard heat treatment and two different duplex surface treatments combining plasma nitriding and PVD Ti(C,N) coating, with or without an intermediate grinding step. The as-built microstructure consisted of martensite, retained austenite, and MC/M₂C carbides. Heat treatment homogenised the microstructure and eliminated retained austenite. Both heat-treated and surface-treated specimens exhibited high bulk hardness (~64 HRc), high tempering resistance and high compressive strength (σy≈3000 MPa). Duplex-treated samples achieved surface microhardness values up to 1100 HV₀.₀₂₅, compared to 850 HV₀.₀₂₅ for the heat-treated condition. Coating delamination was observed in the sample subjected to slight nitriding and subsequent PVD, due to destabilisation of the nitrided white layer during the PVD. This issue was not observed in the sample that underwent intense nitriding, where a surface grinding step was introduced prior to coating, resulting in acceptable adhesion of the Ti(C,N) layer. Both the heat-treated and surface-treated samples exhibit good compressive strength. However, the application of duplex treatments has a negative effect on impact toughness. The duplex surface treatment improves fatigue resistance by about 20%, particularly at low stress amplitudes, by shifting the initiation of the fatigue crack from the surface. This work provides a comprehensive study of how heat treatment and the duplex surface-treatments investigated alter microstructure, hardness, adhesion, wear and mechanical properties of EBM-processed Vanadis 4 Extra SuperClean, linking process, microstructure and mechanical/tribological performance to demonstrate practical routes for tooling components made by EBM.