28 November 2017 in IEEE Internet of Things Journal
Internet of Things (IoT) is becoming an emerging paradigm to achieve ubiquitous connectivity, via massive deployment of physical objects, such as sensors, controllers, and actuators. However, concerns on the IoT security are raised due to the wireless broadcasting nature and the energy constraint of the physical objects. In this paper, we study secure downlink transmission from a controller to an actuator, with the help of a cooperative jammer to fight against multiple passive and noncolluding eavesdroppers. In addition to artificial noise aided secrecy beamforming for secure transmission, cooperative jamming (CJ) is explored to further enhance physical layer security. In particular, we provide a secrecy enhancing transmit design to minimize the secrecy outage probability (SOP), subject to a minimum requirement on the secrecy rate. Based on a strict mathematical analysis, we further characterize the impacts of the main channel quality and the minimum secrecy rate on transmit designs. Numerical results confirm that our design can enhance both security (in terms of SOP) and power efficiency as compared with the approach without CJ.
24 September 2018 in IEEE Internet of Things Journal
This work focuses on the security risks in the access authentication of Internet of Things (IoT), to provide an optimized classification algorithm of radio frequency fingerprinting (RFF). The novel method is based on coherent integration, multi-resolution analysis and Gaussian SVM. First, we proposed a de-noising algorithm for RFF as the present performance of RFF is seriously affected by the noise. The optimized coherent integration firstly developed in this paper effectively improves the signal-to-noise ratio (SNR) of the waveform without increasing the number of required signals, by which a de-noising processing is performed and the identification accuracy is improved. Then a wavelet based multi-resolution analysis is applied to extract feature points in the waveform that has passed the de-noising optimizer, because the less sample points are needed for the support vector machine (SVM) classification processing, which reduces the computational complexity of SVM compared to the classical SVM classification methods where massive sample points are necessary. Extensive experiments are performed. Simulation result shows that the optimized classification algorithm achieves a high accuracy (exceed 99%) at a relatively low SNR (0 dB), which is the best result compared with other existing methods.
25 August 2017 in IEEE Transactions on Vehicular Technology
This paper investigates cooperative security in wireless networks, where a source (Alice) intends to transmit a confidential message to a legitimate destination (Bob), with the help of a cooperative jammer (Charlie), coexisting with multiple passive eavesdroppers (Eves). In particular, by assuming knowledge of Bob's perfect channel state information (CSI) but only Eves' statistical CSIs, secrecy beamforming with artificial noise (AN) is utilized for secure transmission, and cooperative jamming (CJ) is explored to further enhance secrecy. We first derive an accurate closed-form expression for the secrecy outage probability (SOP), and establish the condition under which positive secrecy rate is achievable. Then, we provide a secure transmit design for maximizing the SOP constrained secrecy rate. Moreover, based on a strict mathematical analysis, we characterize the impact of the main channel quality and the number of Eves on transmit design and secrecy performance. Specifically, optimal power allocation ratio between the information-bearing signal and the AN signal increases as the main channel quality improves, and decreases with the number of Eves. Numerical results confirm that our design achieves performance improvement in terms of both secrecy rate and secure energy efficiency, as compared to the approach without CJ.
29 November 2016 in IEEE Communications Letters
We investigate the physical layer security in cooperative wireless networks where a source (Alice) transmits a confidential message to a destination (Bob) with the help of a cooperative node (Charlie), in the presence of an eavesdropper (Eve). Cooperative transmission is explored to secure communication between Alice and Bob, while ensuring the desired quality of service (QoS) at Charlie's receiver. We provide a transmit design for outage constrained secrecy rate maximization, taking both security and QoS constraints into account. Unlike the conventional cooperative security that adopts a fixed transmission scheme, we propose a mechanism for transmit strategy adaptation with security protection. Specifically, the proposed cooperative transmission is replaced by a cooperative jamming scheme if either security or QoS constraint is not satisfied. Numerical results confirm that our design enables dynamic transmission, and thus is flexible and environment-adaptive.
21 June 2018 in IEEE Transactions on Vehicular Technology
In this paper, we study a cooperative secure trans mission in wireless network where a transmitter (Alice) intends to send a secret message to an authorized receiver (Bob), with the aid of a friendly private cooperative jammer (Oscar), in the presence of a malicious eavesdropper (Eve). Specifically, artificial noise (AN) assisted secrecy beamforming is utilized for secure transmission. Under the imperfect channel state information (CSI) of legitimate channels and the statistic CSI of illegitimate channels, the optimal power allocation ratio between the information-bearing signal and the AN signal for maximizing secrecy rate is derived. We notice that high channel estimation error is greatly detrimental to the realization of the positive secrecy rate in secure system. For overcoming this drawback, back propagation neural network (BPNN) is employed for channel estimation to simulate a realistic security communication scenario. The numerical results show that channel estimation errors result in a decrease in secrecy rate, but the BPNN channel estimator still can guarantee secure transmission which verifies the feasibility of the application of physical layer security. Analytical derivations and numerical simulations are presented to validate the correctness of obtained expressions and our analysis.
5 September 2016 in IEEE Access
We study physical layer security in two-cell wireless networks in which a base station (Alice) intends to send a confidential message to a legitimate user (Bob) with the help of a cooperative base station (Charlie), in the presence of an eavesdropper (Eve). Adaptive base station cooperation is explored to secure communication between Alice and Bob, and ensure the desired quality of service (QoS) at Charlie's user. In particular, we consider two different scenarios where the channel state information of Eve is perfectly and statistically known, respectively. In either scenario, we provide a cooperative transmission scheme for secrecy rate maximization, subject to both security and QoS constraints. Unlike the conventional cooperative security with a fixed transmission scheme, we propose a mechanism for transmit strategy adaptation with security protection. Specifically, the cooperative transmission is replaced by a cooperative jamming scheme if either security or QoS constraint is not satisfied. Our design enables adaptive secure transmission, and thus is flexible and environment-adaptive. Moreover, numerical results confirm that our scheme is efficient in power resource utilization.