16 December 2022 in Composites Part C: Open Access
OAOkwuchukwu Innocent Ani
GEGodspower Onyekachukwu Ekwueme
Godspower Onyekachukwu Ekwueme
AOAnthony Chinweuba Onovo
+2
10 July 2024 in Scientific African
IAIkechukwu D. Anyaegbuna
+3
Indoor air quality (IAQ) in confined spaces like bank vaults and basements is influenced by complex factors such as building layout and HVAC systems. This study examines how mechanical ventilation impacts IAQ in a bank building's occupied basement vault, addressing significant challenges posed by pollutant exposure in these air-tight environments. This study advances safe IAQ in confined spaces, crucial for occupant health and safety, using CFD (ANSYS Fluent Workbench 16.0) and CONTAM 3.2 software for multi-zone ventilation and air quality analysis. It analysed three indoor pollutants: Radon (Rn), Carbon dioxide (CO 2), and Particulate Matter (PM2.5), enhancing the reliability and applicability of the findings. The findings indicated that the simulated indoor pollutants concentrations did not exceed the indoor air quality guideline levels. The CFD simulations predicted average steady-state values of 27.2 Bq/m 3 for Radon, 574.80 ppm for CO2, and 69.36 µg/m3 for PM2.5 in the basement. For different outdoor air floor rates, an optimal ventilation rate of 4.7 ACH and a cooling load of 17 kW were determined to maintain Radon concentrations below 15 Bq/m3 . This provides a practical and actionable solution for maintaining safe IAQ in confined spaces, which is a significant step forward compared to similar studies. These results align with other experimental research, validating the use of numerical techniques in indoor air quality studies. By optimizing HVAC systems to maintain IAQ and minimize energy consumption, the study supports SDG 7 (Affordable and Clean Energy) by enhancing energy efficiency, SDG 3 (Good Health and Well-being) by reducing exposure to indoor pollutants, and SDG 11 (Sustainable Cities and Communities) by improving air quality management in confined spaces. The findings are particularly relevant for Africa, offering practical solutions, informing policy direction, and supporting the African Union's Agenda 2063 and SDGs 3, 7, and 11.
31 March 2023 in Journal of Modern Thermodynamics in Mechanical System
IMIkenna Uchechukwu Mbabuike
Ikenna Uchechukwu Mbabuike
Surface thermodynamics study is the application of colloidal science to an investigative search for the nature and rate of heat transfer on the surface of any particle-particle interaction. This paper presents the theory and a designed practical methodology for the demonstration of the Combined Hamaker Coefficient. The nature and effectiveness of any interaction between two or more particles can be determined using this thermodynamic approach. Samples of blood lymphocytes and HIV particles in a serum containing antiretroviral drug particles were used. The Hamaker concept based on Van der Waal’s theory for surface energy of attraction and repulsion can be demonstrated. The interfacial work done by particles can be investigated during their combined interaction in an in-vivo experiment. The data obtained can prove that the combined Hamaker coefficient when negative is responsible for particle-particle repulsion and positive for particle-particle attraction. This implies the repulsion of the viral particle in lymphocytes and drug particles in the intervening serum. The overall change in the energy potential of all particle matter is revealed to be a concurrent area of surface thermodynamics that employs mathematical concepts and software in the designing and formulation of drugs for the management of viral infections.
24 January 2023 in Journal of Water Resources and Pollution Studies
BOBlessing Josephine Ossai
This study investigated the effect of contact time of two agricultural wastes (cassava peels and ripe plantain peels) used as bio-adsorbents that were modified with base and acids to ascertain their ability to absorb nitrogenous compounds from hospital and abattoir wastewater. The absorbents were prepared using standard procedures into powdered forms and a portion was modified with acid and base respectively. Fourier Infrared spectroscopy was used on the prepared absorbents to determine the organic and functional groups present. Each modified bio-adsorbents was used to inoculate each of the 250 ml flasks containing the wastewater sample. Contact was allowed to be made for 14 hours and the nitrogen removal rate was measured and recorded. The Nitrogen concentration in the wastewater was determined using Ultra-violent spectroscopy. Response surface optimization was used to investigate the effect of contact time on the nitrogen removal rate. Models were generated to analyze the interactions between variables at optimum conditions. The results showed that the bio-adsorbents have the ability to remove nitrogen from wastewater. The nitrogen percentage removal recorded was 57%, 81%, and 77%, 55%, 91% ,and 78% respectively. The R2 from ANOVA was seen to be 96.5%, 97.9%, 97.9%, 98.2%, and 99.7%, and 97.9% repectively. Experimental results were best fitted into linear and quadratic polynomial models. The optimum conditions having desirability of 0.964 showed that the time of 13.558 hrs. The values obtained are a good indicator that the bio adsorbents used in this should be considered by the chemical industries in the process of absorbent design and production.