1 May 1998 in Acta Materialia
1 June 2007 in Acta Materialia
29 August 1997 in Science
Precipitation hardening, in which small particles inhibit the movement of dislocations to strengthen a metal, has long been used to improve mechanical strength, especially of aluminum alloys. The small size of precipitates and the many possible variants of the orientation relation have made their structural determination difficult. Small precipitates in commercial aluminum-magnesium-silicon alloys play a crucial role in increasing the mechanical strength of these alloys. The composition and structure of the β” phase in an aluminum-magnesium-silicon alloy, which occur as precipitates (typically 4 nanometers by 4 nanometers by 50 nanometers) and are associated with a particularly strong increase in mechanical strength, were determined. Element analysis indicates that the composition is Mg 5 Si 6 . A rough structure model was obtained from exit waves reconstructed from high-resolution electron microscopy images. The structure was refined with electron nanodiffraction data (overall R value of 3.1 percent) with the use of a recently developed least squares refinement procedure in which dynamic diffraction is fully taken into account.
1 February 2003 in Acta Materialia
1 January 2001 in Acta Materialia
21 June 2007 in Philosophical Magazine
TEM investigations of two alloys isothermally heat treated at 175°C and 260°C show how Cu additions to the Al–Mg–Si system affect precipitation. Both alloys had a solute content Mg + Si = 1.3 at.%, 0.127 at.% Cu, but with Mg/Si 0.8 and 1.25. Cu-containing Guinier-Preston (GP) zones and three types of Q′ precursors are identified as most common phases at peak-hardness conditions, whereas β″ accounts for maximum 30% of the total number of precipitates. The precursors have needle (L and S precipitates) or plate (C precipitate) morphologies. They consist of different arrangements of Al, Mg and Cu atoms on a grid defined by triangularly arranged Si planes parallel with and having the same period as {100} Al planes. The Si grid is composed of nearly hexagonal sub-cells of a = b = 4.05 Å, c = 4.05 Å. The Cu arrangement on the grid is often disordered in the needle precursors. The plate precursor is ordered, with a monoclinic unit cell of a = 10.32 Å, b = 8.1 Å, c = 4.05 Å, γ = 101°.