1 June 2019 in International Review of Applied Sciences and Engineering
Nanotechnology is a perspective manufacturing technology, and in the technical fields, it deals with the production, development and utilization of technologies and materials with dimensions in nanometre sizes (1–100 nm). Nanofilters used in the article for filtration purposes consist from a nanolayer which is applied to a coarse textile backing layer, and they are inserted into the frames as conventional textile filters. The most commonly used materials are PP and PE polymers, as well as carbon, glass and metal filters. With the fabrication of nanotechnology-based filter, it is very important to choose materials, polymers with specific properties, which can be used for filtration function of the product itself. The results given in the main article compare the nanofilters with the main representatives of existing filter products currently available on the market. There is a problem with high pressure loss of the nanomaterial, and when we compare them with traditional filters, it is difficult to use them in technical practice, even if there exists the possibility for us to define the material and the thickness of the layer which are adapted to the application-specific application conditions.
1 January 2021 in IOP Conference Series: Earth and Environmental Science
The paper presents the possibility of management the fan performance in dependence on CO2 concentration. A mathematical calculation is made from the prediction of the electric energy consumption for a variant control algorithm. The most advantageous algorithm is programmed into the actual fan control system, and its power consumption is shown in graph. Finally, the saving of the adaptive control is compared to the classical control over time. To program the control algorithm, the CO2 mass balance equation is used. The equation depends on the input values, namely the number of CO2 sources, the room volume and the supply air. Due to the infinitely variable of fan control, it is possible to adjust the power setting depending on the expected development of the logarithmic rise of CO2 concentration in the room. This prediction is programmed with the Visual Basic code and program code can be used to the Arduino control unit, which controls the EC fan power with a 0-10 V signal. Although significant savings over a short period of time can not be expected, the ventilation system where the fan runs for a significant part of the year will be substantial. Therefore, the result will be presented by graphical diagrams of different ways of controlling the fan per year of operation.
27 October 2014 in Advanced Materials Research
The main requirements of designing the internal microclimate in swimming pool halls include removing evaporating water vapor and trichloramine (NCL3) from occurrence area of swimmers. As it is apparent from the differential equation of the mass transfer over the water surface, so with increasing speed above the water level there is increasing evaporation of water vapor at the same time. This is undesirable in view of the requirement to maintaining humidity below the upper limit of recommended limits. The article aims to point out the problem with the releasing trichloramines from the water surface and thus point to a potential increase in water vapor evaporated from the water.
1 December 2016 in Applied Mechanics and Materials
The article deals with analysis of the heat balance and temperature microclimate of indoor space of a four-storey building atrium. With regard to the anticipated thermal loads in all functionally connected rooms, investor made a request to verify the thermal stability of the atrium before the implementation stage. Atrium and adjacent rooms are a geometrically complicated inner space which cannot be solved by analytical methods to ensure the required temperature conditions in occupied zone. This led to the creation of a mathematical model of the atrium with the current project solution. The result of the simulation of the existing solutions is that there is not complied desired air temperature in the occupied zone. For this reason, it was developed optimization of existing variant. Optimization was performed in steps as changing temperature of the central air conditioning system, changing number of units and performance of local refrigeration air conditioning. The conclusion of this paper is to evaluate the thermal profiles of temperature stratification in the atrium area and request the required cooling performance of the ventilation system. The article attempts to use computer modelling as a tool for the placement and performance design of ventilation equipment.