20 January 2023 in IEEE Journal on Flexible Electronics
Everyday healthcare objects have become the focus of interdisciplinary research lines, which aim to monitor human biomedical parameters by means of ergonomic and, ideally, environmentally sustainable sensors. Here, a hybrid system, based on both solution processed- and conventional silicon- technology, is reported. In particular, a strain and a pH sensor are developed based on graphene inks, whilst a humidity detector is implemented using a poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS). The printed sensors are integrated into a demonstrator consisting of a silicon near field communication (NFC) transponder chip with logic and transceiver capabilities, bonded on a circuit board with inkjet-printed components on a paper substrate: an antenna and a power supply (in addition to the sensor). This proof-of-concept seeks to address the needs for future circular economy, as well as those for cheap, flexible and lightweight, multi-functional electronics.
17 September 2024 in IEEE Sensors Journal
The global demand for zero-waste technologies requires the development of electronic devices with sustainable fabrication processes and (ideally) biodegradable materials and substrates. This article reports on the fabrication and electrical characterization of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)-based organic electrochemical transistors (OECTs) on naturally degradable cyclododecane (CDD)-based substrates. The electrical performance of the devices is tested in a closed box flushed with nitrogen gas under ambient and different humidity conditions. The devices exhibit an I ON /I OFF of more than 10 3 and transconductance values up to 300 mS. As a proof-of-concept of the potential use of the PEDOT:PSS OECTs for biosensing and environmental monitoring, their application as pH sensors is presented. The sensitivity of 2.25 mS/pH and the signal amplification (up to 50 mS) obtained in this study offer a promising perspective that opens to the formulation of strategies for a more responsible approach to the production and recovery processes of electronic platforms, thus contributing to sustainable technological practices.