1 November 2022 in Analytica Chimica Acta
15 September 2022 in Journal of Chromatography A
A major challenge in processing of complex data obtained from chromatography hyphenated to mass spectrometry is to resolve chromatographically co-eluting compounds. In this study, we present a workflow for the resolution of ultra-high pressure liquid chromatography high-resolution mass spectrometry data obtained by the broadband data-independent acquisition MSE operation (UHPLCHRMSE). The workflow is based on a recently introduced algorithm for Parallel Factor Analysis 2 (PARAFAC2) that allows to enforce non-negativity on all the model coefficients. The workflow was tested on three sets of UHPLC-HRMSE measurements from a Lupinus angustifolius L. crop field study, which included plant tissue samples, soil samples and samples from drainage water as well as stream water close to the field. The three datasets included 93, 59, and 75 chromatographic runs in total for the plant, soil and water batches, respectively. Nonnegative-PARAFAC2 models were fitted on the summed high and low energy (HE and LE) traces on chromatographic intervals corresponding to spiked standard for the three sample sets independently. In soil and plant samples, 13 out of 14 spiked standards were resolved by NN-PARAFAC2 even in presence of chromatographic co-elution, and their mass spectral loadings could be matched to a reference spectrum. In contrast, only seven spiked standards were correctly resolved and matched for the water samples because a higher chromatographic baseline rendered the data noisier. The results show that the workflow we present can provide improved mass spectral selectivity for data-independent acquisition compared to using the raw mass spectra and can be used to match fragment ions from the HE trace, and precursor and adduct ions from the LE trace even in presence of co-eluting compounds.
1 March 2020 in Analytica Chimica Acta: X
A fast and efficient selective pressurized liquid extraction (sPLE) method was developed to extract secondary metabolites from complex plant matrix. Convallaria majalis L., a plant producing toxic steroids, was used as proof-of-concept. The method was optimized in the aspects of preheating, dispersant, extraction temperature and solvent, and the use of C18 as in-cell cleanup sorbent. Eight authentic natural steroids with diverse sugar moieties and hydrophobicities were selected as reference analytes and spiked to 0.1 g dried leaves. The extraction performance was evaluated based on the analytes’ stability, recovery, matrix effect in the electrospray interface and the level of co-extractives. With the optimal method, the extraction was finished in 10 min. A colorless extract was obtained with recoveries ranging from 63% to 107% and absolute matrix effects ranging from 3% to 27%. The optimized method was validated by extracting 0.1 g, 0.2 g and 0.4 g spiked plant samples; method accuracy and precision were assessed by recoveries and relative standard deviations of the combined extraction-analysis workflow. The method was also tested on soil samples and indicated its suitability for measuring secondary metabolites in multiple environmental matrices. To our knowledge, this is the first time sPLE has been reported to extract plant secondary metabolites from a complex plant matrix, with satisfactory recoveries and low matrix effects. This is also the first time (s)PLE has been reported to extract plant secondary metabolites from soil. We envision the method be coupled with liquid chromatography-electrospray ionization-high resolution mass spectrometry in a standard metabolomics workflow to facilitate plant metabolomics studies.
1 December 2021 in Ecotoxicology and Environmental Safety
We aimed to investigate how sulfur (S) application prior to oilseed rape cultivation influences the uptake of cadmium (Cd) by rice grown in low- and high-Cd soils. A pot experiment involving four S levels (0, 30, 60, 120 mg S kg-1) combined with two Cd rates (low and high-0.35 and 10.35 mg Cd kg-1, respectively) was conducted. Soil pore water during rice growth and plant tissues at maturity were analyzed. The soil pore water results indicated that S application decreased Cd solubility under submergence due to the S-induced increase of soil pH and the enhancement of sulfide formation in soil micropores. When S was applied at rates of 30, 60 and 120 mg S kg-1, brown rice Cd concentrations decreased by 18%, 18%, and 55% (p < 0.05) in the low-Cd soil but increased by 20%, 40%, and 40% in the high-Cd soil compared with those in the non-S treatment. The different effects of S on Cd accumulation in brown rice were related to Cd-induced oxidative stress in the rice plants. In low-Cd soils, a S-induced increase in phytochelatins in rice roots restricted and inhibited Cd translocation in brown rice. In high-Cd soils, the Cd-induced oxidative stress in rice plants weakened the protective effects of S, while highlighted the promotion of Cd uptake by S. Overall, S fertilizer is recommended for oilseed rape-rice rotations in low-Cd paddy fields. In high Cd-contaminated fields, oilseed rape-rice rotations are suitable for the simultaneous remediation by oilseed rape and production of rice without S fertilization.
1 April 2021 in Journal of Chromatography A
1 February 2023 in Environmental Science & Technology