Amines alkylation with alcohols catalyzed by γ-Al2O3-supported nickel and copper nanoparticles under continuous process conditions at atmospheric hydrogen pressure and 180–220°С has led to the formation of alkylated products with selectivity up to 100%.
The creation of the “correct” surface in heterogeneous catalysis is an important condition for the optimal operation of a number of catalytic systems, for example, hydrogenation (nitrobenzene dicyclopentadiene).
Objectives. The work set out to develop catalysts based on nickel and copper obtained by active phase chemical reduction and investigate their activity including the influence of the type of supports on the course of alkylation of amines with primary or secondary alcohols in a plug-flow reactor with a fixed catalyst bed.Methods. The reactions were carried out in a continuous mode on a fixed bed of an appropriate catalyst in a plug flow microcatalytic apparatus at 160–240°C. NaX zeolite, magnesium oxide, and γ-Al2O3 were used as supports. After preparing the catalysts by impregnation from an excess solution of metal salts, the active metal phase was reduced with a sodium tetrahydridoborate aqueous solution. The composition of the resulting products was analyzed by gas–liquid chromatography, while their structure was confirmed by gas chromatography-mass spectrometry. The alkylating agents were ethanol, 2-propanol, 1-butanol, 1-pentanol, benzyl alcohol, and 1-octanol; alkylated amines were 1-butylamine, 1-hexylamine, 1-octylamine, aniline, morpholine, piperidine, and hexamethyleneimine.Results. The alkylation of amines with alcohols catalyzed by metal (nickel and copper) nanoparticles supported on NaX zeolite, magnesium oxide MgO, and γ-Al2O3 in a plug-flow reactor with a fixed catalyst bed at atmospheric hydrogen pressure and 160–240°C leads to the formation of predominantly mono-N-alkylated products with yields up to 99%.Conclusions. Nickel (or nickel and copper) nanoparticles supported on various supports are effective catalysts for the synthesis of secondary or tertiary amines in the plug-flow reactor.
1 February 2024 in Russian Journal of General Chemistry
The hydrogenation of a number of carbonyl compounds with the formation of the corresponding alcohols was studied. The process was carried out in a flow-type reactor in the presence of nickel catalysts supported on γ-Al2O3 obtained by the deposition-precipitation method with chemical reduction of the active phase. The effect of the catalyst preparation method on the yield of the resulting alcohols was studied. It has been shown that the increase in the nickel content in the catalyst leads to complete substrates conversion even at 20–80°C and atmospheric hydrogen pressure.