23 January 2019 in Journal of Microelectromechanical Systems
Recent advancements in the field of piezoelectric micro-resonators have produced devices, such as lithium niobate laterally vibrating resonators, with very high electromechanical coupling factors (kₜ²) and respectable quality factors (Q). As a result, the records of the figure of merit (FoM) for radio-frequency MEMS resonators have been broken several times in the past five years. As exciting as these high FoMs are, they impose unique caveats in accurately extracting the electromechanical coupling often due to the presence of spurious modes. It is a less noted issue for micro-resonators with moderate kₜ², as spurious modes either are absent or do not significantly affect the common extraction technique based on identifying resonances and anti-resonances. This paper will first theoretically analyze how disregarding spurious modes can potentially lead to inaccurate extraction of kₜ² of the intended mode and then offer a framework that accounts for spurious modes and accurately extracts electromechanical coupling using a multi-resonance recursive fitting. [2018-0209]
1 December 2020 in IEEE Electron Device Letters
In this work, wide band radio-frequency (RF) shear-horizontal surface acoustic wave (SH-SAW) resonators were designed and fabricated to attain a large effective electromechanical coupling (k2) over 35% near 1-GHz based on a thin-film lithium niobate (LiNbO3/LN) on insulator layered substrate. In this study, the single-crystalline LiNbO3 thin film was bonded to a (100)-silicon carrier wafer with an intermediate silicon dioxide (SiO2) layer to form a simple and low-cost hetero acoustic impedance waveguide. Fabricated resonators with Au-electrodes show scalable wavelengths from 3.2 μm to 4.4 μm (770 to 1008 MHz) featuring k2 > 35% and Q of 250, which are sufficient for wide band RF filtering applications. Additionally, the potential of the SH-SAW resonator is demonstrated by a numerically synthesized ladder filter with a center frequency of 970 MHz, a 3-dB fractional bandwidth of 29.6%, and an insertion loss (IL) around 1.8 dB. It suggests the feasibility of developing wide bandwidth acoustic RF devices for potential 5G wireless communication through further design and fabrication optimizations.
2 July 2014 in Journal of Microelectromechanical Systems
A fully monolithic complimentary metal-oxide- semiconductor-microelectormechanical systems (CMOS-MEMS) oscillator comprised of an ovenized double-ended tuning fork resonator to enable ultra-low heater power operation of only 0.47 mW over entire temperature span (-40 °C to 85 °C) and a low noise sustaining circuit to achieve low phase noise has been demonstrated in a Taiwan Semiconductor Manufacturing Company (TSMC) 0.35-μm CMOS process. The combination of low thermal conductivity material and high thermal isolation design is the key to attaining ultra-low-power heater operation in a sub-mW level. Passive temperature compensation scheme is also conducted in the proposed CMOS-MEMS resonator by an oxide-metal composite structure, showing a low temperature coefficient of frequency (TC f ) of only +5.1 ppm/°C, which is suited for the use in ovenized oscillator systems. By implementing a constant-resistance temperature control scheme, the frequency drift of the resonator smaller than 120 ppm from -40 °C to 85 °C is demonstrated in this paper, indicating an equivalent TC f smaller than 1 ppm/°C, a record-low value against its CMOSMEMS counterparts. The CMOS-MEMS oscillator operating at 1.2 MHz demonstrates a phase noise of -112 dBc/Hz at 1-kHz offset and -120 dBc/Hz at 1-MHz offset while drawing less than 1.3 mW. The entire power consumption of the ovenized oscillator system is confirmed to be less than 1.8 mW (oscillator + micro-oven), verifying the great potential of low power oven-controlled MEMS oscillators realized in CMOS-MEMS technology.
20 April 2021 in Journal of Micromechanics and Microengineering
This work investigates the design methodology to obtain large electromechanical coupling factor ( ) and high quality factor ( Q ) of shear-horizontal surface acoustic wave (SH-SAW) resonators based on the thin-film lithium niobate-on-insulator (LNOI) technology. The guided SH wave can be excited through interdigital transducers and propagate at the very surface of the material stackings. Such a guided SH wave in LN/SiO 2 double layer structure is expected to offer high by confining the elastic strain energy in the piezoelectric thin film. To capture the optimum design window for high-performance LNOI SH-SAW devices, the impact of electrode material and its thickness on the dispersive characteristics are intensively investigated by finite element method (FEM). In this study, various one-port resonators with wavelengths from 2.8 μ m to 8 μ m were fabricated on a LNOI wafer with LN and SiO 2 thickness of 0.7 and 2 μ m, respectively. The 100 nm thick gold film was chosen as the electrode of the devices, which demonstrate a similar dispersive behavior to the FEM simulation with small discrepancy. Among the measurement results over several tested samples, a high- of 25.5% and Q of 960 was recorded at a resonance frequency of 581 MHz (FOM = = 245), revealing great potential for the application of wide-band frequency selection in telecommunications.
10 May 2019 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
We present the first group of GHz S0 mode low-loss and wide-band acoustic delay lines. The acoustic delay lines use single-phase unidirectional transducers design to launch and propagate the S0 mode in an X-cut lithium niobate thin film with large electromechanical coupling and low damping. In this work, the theoretical performance bounds of S0 mode acoustic delay lines are first investigated, significantly surpassing those in state of the art. The design trade-offs of S0 mode acoustic delay lines, when scaled to the GHz frequency range, are also discussed. The fabricated miniature acoustic delay lines show a fractional bandwidth of 4surface acoustic wave counterparts, covering a wide range of delays from 20 ns to 900 ns for digitally addressable delay synthesis. Multiple acoustic delay lines with center frequencies from 0.9 to 2 GHz have been demonstrated, underscoring their great frequency scalability. The propagation properties of S0 waves in lithium niobate at the GHz range are experimentally extracted. The demonstrated acoustic delay lines can potentially enable wide-range and high-resolution delay synthesis that is highly sought-after for the self-interference cancellation in full-duplex radios.
6 January 2020 in Journal of Applied Physics
Acoustically driven antennas operating at resonant wavelengths up to 105 times smaller than electrical antennas offer great potential for portable, low power communication systems in the very low frequency and low frequency range. Acoustic antennas with real resonant impedances have been demonstrated to offer orders of magnitude better total efficiency compared to similar sized, subwavelength electrically small antennas exhibiting large reactances. While most acoustic antennas share favorable impedance characteristics offering significant matching efficiency advantages over electrically small antennas, radiation efficiency varies greatly based on the implementation of the acoustically driven antenna. This paper presents a theoretical analysis of the three primary methods for implementing acoustically driven radiating elements, investigating both radiation and matching efficiencies comprising the total antenna efficiency. Radiation from the linear movement of unipolar charge driven both piezoelectrically and capacitively, the piezoelectrically actuated rotation of fixed dipole charges, and from flipping dipoles inside strain driven piezoelectrics are all presented and analyzed in terms of their design parameters and fundamental challenges. The efficiency of each type of acoustic antenna is referenced to an equivalent electrical antenna to benchmark the performance to a more familiar framework. Of the analyzed antenna types, piezoelectric alternating dipole antennas exhibit the most promise, with efficiencies more than a million times greater than electrically small antennas expected as piezoelectric materials, and resonator designs are optimized for acoustic radiation.