Mahdi Saleh

Mahdi Saleh

Auto-generated profile, based on publicly available information

Mahdi Saleh

Department of Electrical and Electronic Engineering, University of Manchester

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2016
Verified
Conference Paper
Closed access
MSMahdi Saleh
Mahdi Saleh
IEImad H. Elhajj
Imad H. Elhajj
DADaniel Asmar
Daniel Asmar
IBIsam Bashour
Isam Bashour
SKSamer Kidess
Samer Kidess
Soil moisture sensors are used mainly to help farmers to plan irrigation scheduling and save fresh water usage. The measurement of soil moisture based on electrical resistivity is widely used by farmers due to its simplicity and low cost. This research aims to evaluate the performance of low-cost resistive soil moisture sensors under greenhouse conditions. For this purpose, sensors have been assessed by several calibrations and evaluation experiments. Soil moisture percentages were logged daily to obtain curves relating moisture percentages to voltages provided by the sensors. The obtained results revealed that resistivity based sensors were affected by several sources of error, which lead to severe problems regarding accuracy and usability.

10 September 2018 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
MSMahdi Saleh
Mahdi Saleh
GOGhassan Oueidat
Ghassan Oueidat
IEImad H. Elhajj
Imad H. Elhajj
DADaniel Asmar
Daniel Asmar
During an oil spill response, one of the main challenges is the ability to measure, in situ and in real time, the oil slick thickness at different locations throughout the slick. This paper presents an instrument that can respond to this need by employing a capacitive-based sensor designed for oils of different viscosities. There are three main advantages to our proposed instrument over the prior art: first, it can operate in dynamic environments, measuring oil thicknesses under wavy sea conditions and while dragged. Second, our proposed design requires only initial factory calibration; once a baseline capacitance is recorded in the air, the instrument can measure the thickness of oils under varying environmental conditions and for both light and crude oils. Third, using solutions in both software and hardware, our instrument mitigates the effect of oil fouling, an issue long considered problematic in the community of oil thickness measurement. The proposed instrument was tested extensively at the Ohmsett Facility, first in a laboratory, then inside a large outdoor tank, by dragging the sensor at different velocities, through waves of varying amplitude and frequency. Results demonstrated the accuracy, repeatability, and robustness of the proposed instrument using multiple oil types and thicknesses under static and dynamic conditions.

1 February 2021 in Digital Signal Processing
Verified
Journal Article
Closed access
MSMahdi Saleh
Mahdi Saleh
SOSamir-Mohamad Omar
Samir-Mohamad Omar
ÉGÉric Grivel
Éric Grivel
PLPierrick Legrand
Pierrick Legrand

9 July 2024 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
MSMahdi Saleh
Mahdi Saleh
IEImad H. Elhajj
Imad H. Elhajj
DADaniel Asmar
Daniel Asmar
Oil thickness information is essential for enhancing the effectiveness of oil-spill remediation techniques such as mechanical skimmers, chemical dispersants, and in situ burning. Even though remote sensing methods can provide a global assessment of the spill extent, they are not suitable for providing accurate estimates of the local oil spill thickness due to varying oil properties and dynamic environmental conditions. To measure the thickness of oil spills locally and with high accuracy, in situ sensors were proposed in the literature relying on optical, electrical, acoustic, and vision sensing modalities. These sensing systems have different structures including single probes, multi-electrode arrays, and movable electrodes. This article provides a critical review of in situ oil spill detection and thickness measurement systems. It focuses on explaining their working principles, properties, and limitations. The ultimate aim of this work is to facilitate the understanding of the state-of-the-art oil spill sensors and to provide an objective assessment of their ability to measure oil film thicknesses in open water environments. Despite its importance, this topic is poorly studied in the instrumentation and measurement domain. To the best of our knowledge, no similar reviews are available in the literature.

9 September 2024 in IEEE Sensors Letters
Verified
Journal Article
Closed access
MSMahdi Saleh
Mahdi Saleh
This work evaluates the performance of a non-supervised clustering method for identifying abrupt changepoints in streaming sensor data. The proposed method utilizes the Jenks Natural Breaks (JNB) algorithm, applied in near real-time using sliding temporal windows to analyze sections of sensor data and identify instances of significant phase changes. It is suitable for sensing applications that rely on detecting instantaneous changes in the sensed data for fast decisions, such as fire alarms, fault detection, and activity recognition. The method was applied to a custom dataset from twelve electrodes transitioning between different materials. Performance was evaluated based on detection accuracy and delay comparisons. Results demonstrate that applying JNB in a sliding window with a step size of half its length achieves the highest detection accuracy and the lowest error delay compared to non-overlapping windows.

5 October 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
MSMahdi Saleh
Mahdi Saleh
ATAli Rida Tabikh
Ali Rida Tabikh
IEImad H. Elhajj
Imad H. Elhajj
KMKristi McKinney
Kristi McKinney
DADaniel Asmar
Daniel Asmar
During oil spills, an accurate estimate of the oil-slick thickness at different locations within the affected area is an essential requirement to estimate the spilled amount, assess and enhance the performance of skimmers, and decide on the type of remediation techniques to be applied such as in situ burning. This requirement cannot be satisfied using remote sensing techniques, which can provide a global assessment of the oil spill extent but not an accurate localized estimate of its thickness, particularly for thicker oil slicks. To solve this problem, we propose a new in situ measurement system that works based on a dual-modality sensing concept, combining capacitive and ultrasonic sensors to provide accurate information about the oil-film thickness in real-time. In this article, we describe the design, implementation, and testing of the proposed system, which was realized as two different devices optimized for different sensing use cases, including a handheld and a skimmer-mount device. The handheld device is intended for use in two scenarios: 1) experimental ground truth to verify oil thickness measurements during experiments at testing facilities and 2) from vessels to obtain sample measurements in the field. The skimmer-mount device is optimized for mounting on skimmers, buoys, or in an oil spill boom apex to provide thickness data continuously under field conditions. The proposed devices were tested at the Cold Regions Research and Engineering Laboratory (CRREL) against different types of oil, in different installation modes, and under static/dynamic liquid conditions. The experimental results demonstrated their ability in providing real-time measurements with high accuracy and precision and without relying on any calibration against different types of water or oil.