In ocean remote sensing missions, recognizing an underwater acoustic target is a crucial technology for conducting marine biological surveys, ocean explorations, and other scientific activities that take place in water. The complex acoustic propagation characteristics present significant challenges for the recognition of underwater acoustic targets (UATR). Methods such as extracting the DEMON spectrum of a signal and inputting it into an artificial neural network for recognition, and fusing the multidimensional features of a signal for recognition, have been proposed. However, there is still room for improvement in terms of noise immunity, improved computational performance, and reduced reliance on specialized knowledge. In this article, we propose the Residual Attentional Convolutional Neural Network (RACNN), a convolutional neural network that quickly and accurately recognize the type of ship-radiated noise. This network is capable of extracting internal features of Mel Frequency Cepstral Coefficients (MFCC) of the underwater ship-radiated noise. Experimental results demonstrate that the proposed model achieves an overall accuracy of 99.34% on the ShipsEar dataset, surpassing conventional recognition methods and other deep learning models.
Spread-spectrum time-domain reflectometry (SSTDR) is used to detect cable faults online. In this study, the signal model of SSTDR cable fault detection was established, and two factors, namely the incident leakage signal and the impedance mismatch between the device and the cable, that affect fault detection performance were analyzed. In this study, an improved method of SSTDR cable fault detection was proposed by combining the transmitter–receiver isolation and trapper. Calibration was performed to obtain the optimal parameters of the circuit. The proposed method can reduce the signal energy leakage from the transmitter to the receiver circuit and suppress the impedance mismatch between the device and the cable. The parameter calibration process of transmitter–receiver isolation and trapper, and the influence of various parameters on the performance of cable fault detection were detailed experimentally. The experiments revealed that the improved SSTDR fault detection can detect faults at various distances. At frequencies of 20, 10, and 5 MHz, the fault detection distance reached 68, 110, and 210 m, respectively. Test results revealed the effectiveness of the proposed method.