Awais Mehmood Kamboh

Awais Mehmood Kamboh

Auto-generated profile, based on publicly available information

Awais Mehmood Kamboh

College of Aeronautical Engineering Technische Universität Wien (TU Wien) Vienna Austria

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 June 2007 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
KOKarim G. Oweiss
Karim G. Oweiss
AMAndrew J. Mason
Andrew J. Mason
Yasir SuhailYasir Suhail
Yasir Suhail
AKAwais M. Kamboh
Awais M. Kamboh
KTKyle E. Thomson
Kyle E. Thomson
This paper describes an area and power-efficient VLSI approach for implementing the discrete wavelet transform on streaming multielectrode neurophysiological data in real time. The VLSI implementation is based on the lifting scheme for wavelet computation using the symmlet4 basis with quantized coefficients and integer fixed-point data precision to minimize hardware demands. The proposed design is driven by the need to compress neural signals recorded with high-density microelectrode arrays implanted in the cortex prior to data telemetry. Our results indicate that signal integrity is not compromised by quantization down to 5-bit filter coefficient and 10-bit data precision at intermediate stages. Furthermore, results from analog simulation and modeling show that a hardware-minimized computational core executing filter steps sequentially is advantageous over the pipeline approach commonly used in DWT implementations. The design is compared to that of a B-spline approach that minimizes the number of multipliers at the expense of increasing the number of adders. The performance demonstrates that in vivo real-time DWT computation is feasible prior to data telemetry, permitting large savings in bandwidth requirements and communication costs given the severe limitations on size, energy consumption and power dissipation of an implantable device.

5 July 2018 in IEEE Access
Verified
Journal Article
Open access
MSMuhammad Sohaib J. Solaija
Muhammad Sohaib J. Solaija
SSSajid Saleem
Sajid Saleem
KKKhawar Khurshid
Khawar Khurshid
Syed Ali HassanSyed Ali Hassan
Syed Ali Hassan
AKAwais Mehmood Kamboh
Awais Mehmood Kamboh
Reliable detection of the onset of epileptic seizures has seen renewed interest over the past few years, owing to several factors including, the global push towards digital health-care, the advancements in signal processing techniques, and the increased computational power of machines. A reliable automatic system could result in tremendous improvement in the quality of life of epilepsy patients. This paper presents dynamic mode decomposition (DMD), a data-driven dimensionality reduction technique, originally used in fluid mechanics, as an instrument for epileptic seizure detection from scalp electroencephalograph (EEG) data. DMD is employed in this work to measure power of signals in different frequency bands. These subband-powers, along with signal curve-lengths, are used as features for training Random Under-sampling Boost (RUSBoost) decision-tree classifier. Postprocessing measures ensure an acceptable balance between false positives and true positives. The proposed algorithm has been tested over a thousand hours of EEG data from two different datasets, the CHB-MIT dataset, and the KU Leuven dataset, giving sensitivity values of 0.87 and 0.88, respectively, and specificity values of 0.99 for both datasets.

10 August 2012 in IEEE Transactions on Neural Systems and Rehabilitation Engineering
Verified
Journal Article
Closed access
AKAwais M. Kamboh
Awais M. Kamboh
AMAndrew J. Mason
Andrew J. Mason
Modern microelectrode arrays acquire neural signals from hundreds of neurons in parallel that are subsequently processed for spike sorting. It is important to identify, extract, and transmit appropriate features that allow accurate spike sorting while using minimum computational resources. This paper describes a new set of spike sorting features, explicitly framed to be computationally efficient and shown to outperform principal component analysis (PCA)-based spike sorting. A hardware friendly architecture, feasible for implantation, is also presented for detecting neural spikes and extracting features to be transmitted for off chip spike classification. The proposed feature set does not require any off-chip training, and requires about 5% of computations as compared to the PCA-based features for the same classification accuracy, tested for spike trains with a broad range of signal-to-noise ratio. Our simulations show a reduction of required bandwidth to about 2% of original data rate, with an average classification accuracy of greater than 94% at a typical signal to noise ratio of 5 dB.

5 November 2007 in IEEE Transactions on Biomedical Circuits and Systems
Verified
Journal Article
Closed access
AKAwais M. Kamboh
Awais M. Kamboh
MRMatthew Raetz
Matthew Raetz
KOKarim G. Oweiss
Karim G. Oweiss
AMAndrew J. Mason
Andrew J. Mason
Time-frequency domain signal processing of neural recordings, from high-density microelectrode arrays implanted in the cortex, is highly desired to ease the bandwidth bottleneck associated with data transfer to extra-cranial processing units. Because of its energy compactness features, discrete wavelet transform (DWT) has been shown to provide efficient data compression for neural records without compromising the information content. This paper describes an area-power minimized hardware implementation of the lifting scheme for multilevel, multichannel DWT with quantized filter coefficients and integer computation. Performance tradeoffs and key design decisions for implantable neuroprosthetics are presented. A 32-channel 4-level version of the circuit has been custom designed in 0.18-mum CMOS and occupies only 0.22 mm2 area and consumes 76 muW of power, making it highly suitable for implantable neural interface applications requiring wireless data transfer.

4 August 2017 in IEEE Access
Verified
Journal Article
Open access
MAMuhammad Zubair Ahmad
Muhammad Zubair Ahmad
AKAwais Mehmood Kamboh
Awais Mehmood Kamboh
SSSajid Saleem
Sajid Saleem
AKAmir Ali Khan
Amir Ali Khan
Epilepsy is one of the most common neurological disorders, which manifests as unprovoked seizures. The prevalence of epilepsy is higher in developing countries, where medical facilities are ill-equipped and under-staffed. Mobile EEG devices promise a new dawn for long-term ambulatory EEG monitoring, which has a potential to revolutionize health care for neurological disorders especially epilepsy. Increasing the outreach to underserved communities and continuous monitoring of patients will yield vast amount of data. This requires the development of a method that can mark regions of interest, to aid in the evaluation of the EEG trial by the experts. Such an experimental setting calls for an unsupervised method, which can detect seizure regions with high accuracy. This paper focuses on the development of a seizure detection method with the above-stated characteristics. Group invariant scattering, a novel data representation technique, has been used for feature extraction. Tested on CHB-MIT data set, the proposed methodology outperforms the current state-of-the-art approaches under similar testing conditions, by successfully detecting 180 out of 197 seizures.

4 May 2015 in IEEE Transactions on Neural Systems and Rehabilitation Engineering
Verified
Journal Article
Closed access
YYYuning Yang
Yuning Yang
CBC. Sam Boling
C. Sam Boling
AKAwais M. Kamboh
Awais M. Kamboh
AMAndrew J. Mason
Andrew J. Mason
Spike detection is an essential first step in the analysis of neural recordings. Detection at the frontend eases the bandwidth requirement for wireless data transfer of multichannel recordings to extra-cranial processing units. In this work, a low power digital integrated spike detector based on the lifting stationary wavelet transform is presented and developed. By monitoring the standard deviation of wavelet coefficients, the proposed detector can adaptively set a threshold value online for each channel independently without requiring user intervention. A prototype 16-channel spike detector was designed and tested in an FPGA. The method enables spike detection with nearly 90% accuracy even when the signal-to-noise ratio is as low as 2. The design was mapped to 130 nm CMOS technology and shown to occupy 0.014 mm 2 of area and dissipate 1.7 μW of power per channel, making it suitable for implantable multichannel neural recording systems.