8 January 2021 in IEEE Transactions on Electron Devices
A neoteric model of the solar-driven integrated device mainly composed of a thermionic generator (TIG) with a graphene-based anode and a thermophotovoltaic cell is presented, where the major irreversible losses inside and outside the system are considered. The analytical expressions for the power output and efficiency of two subsystems and the integrated device are derived. The temperatures of the emitter and collector are determined through heat balance equations. The effects of the voltage outputs of the generator and cell, area ratio of the absorber to the emitter, bandgap energy of the cell, and solar concentration factor on the systemic performance are evaluated. Several main parameters are optimized and parametric selection criteria are provided. The maximum efficiencies of the integrated device operated at different conditions are calculated. For example, under 1000 solar concentration, the efficiency of the integrated device attains 45.23%, which is obviously higher than that of a single solar-driven TIG (STIG) or other existing hybrid systems with a traditional TIG. It is found that replacing metallic anode by graphene anode and integrating a photovoltaic cell into the STIG largely enhance the conversion efficiency of solar energy.
1 September 2021 in Journal of Renewable and Sustainable Energy
A solar-driven charging device composed of a photovoltaic module and a supercapacitor is proposed. Based on the equivalent circuit model of the device, the current–voltage relationship of the hybrid system is established. The energy conversion and storage efficiency and the energy stored in the supercapacitor as functions of the charging time have been derived. The advantage of the theoretical model is that the effects of the series resistance, parallel resistance, solar irradiance, and operating temperature on the charging performance of the supercapacitor can be evaluated. The optimal relationships between the capacitance of the supercapacitor and the charging time at different external conditions, i.e., the optimally matching conditions of the supercapacitor, have been provided. Results show that the proposed theoretical analysis method is capable of efficiently evaluating the performance of photo-supercapacitors under given parameters of practical photovoltaic systems. The proposed model may pave the foundation for the future development of supercapacitors driven by commercial PV modules.