15 November 2022 in IEEE Internet of Things Journal
Structural health monitoring (SHM) is essential for modern large buildings and infrastructure. Radio frequency identification (RFID) widen a new paradigm for SHM in the Internet of Things (IOT) era. This paper introduces a low-cost intelligent RFID monitoring system for future IoT applications. Through adding a multi-parameter sensing strategy to the passive RFID tags that can be deployed on a large scale to form a sensor network, which expands the coverage of IOT in key positions health monitoring of buildings. In this work, a novel chipless RFID strain sensing tag is designed to characterize the magnitude and direction of metal surface strain, and a low-cost detection method suitable for large mechanical structures is proposed. The traditional strain antennas focus on identifying the strain characteristics without the function of encoding, and there are limitations such as the rigid measurement methods and the expensive measurement instruments. The tag designed in this paper integrates both strain sensing and encoding functions, and has the advantages of small size, high data capacity, and information reading is not easily affected by environmental noise. This paper proposes an economical and flexible tag spectrum extraction method, which realizes the intelligent collection and transmission of tag data by connecting lightweight vector network analyzer (VNA) with microcontroller. Combined with the IOT, this method can be well applied to the security assessment and damage detection of large infrastructure structures, which provides a new approach to modern building health monitoring applications from integrated tag design to intelligent detection and risk assessment schemes.
23 March 2022 in IEEE Transactions on Instrumentation and Measurement
According to the current development situation, the application of chipless radio frequency identification (RFID) sensors in structural health monitoring has the disadvantages of difficult detection, poor effect, and single design function, limiting the further development of this technology. Therefore, a new type of RFID strain sensor that realizes the compact structure and separated function of miniaturized chipless RFID coded tags is proposed. The integrated disk monopole antennas make wireless measurement possible. Through the single-parameter strain simulation analysis, six characteristic parameters with good linearity are determined. The time sequences data enhancement algorithm and the background noise data enhancement algorithm are used to expand the training dataset. Then, the BP neural network is utilized for data fusion, and the training error finally converges to 0.0005. A comparison experiment between wired and wireless is designed, and the wireless experiment is optimized through wired experimentation. The results of wireless measurement experiments show that, combined with multiparameter information fusion technology, the average error between the proposed sensor and the actual strain is 6.04%, and the minimum error is 0.25%. The multiparameter fusion monitoring method of the strain sensor corrects the error of single-parameter measurement, and its accuracy and robustness are improved.
19 November 2020 in IEEE Internet of Things Journal
A new structural health monitoring (SHM) program using spectrum sensing and radio-frequency identification technology is presented to measure structural strain. The proposed program involving universal software radio peripheral (USRP) provides an economical alternative to these type of measurements as compared to high-end equipment while this method can achieve more flexible data processing. The overall system for strain detection consists of three main parts: 1) a patch antenna as the sensor for strain; 2) an USRP as a measuring instrument; 3) a computer for data processing. The patch antenna can be used to measure structural strain by interrogating resonant frequency shift due to changes in antenna length. In this article we use the optimized energy detection algorithm applied on USRP to detect the spectrum of the patch antenna, the final measurement results show that the patch antenna sensor has a strain sensitivity 1.7678 kHz/ μ ε while the error between the measured value and the true value of the stress is 2.443% after corrected by machine learning.
21 August 2023 in IEEE Transactions on Instrumentation and Measurement
In the field of Structural Health Monitoring (SHM), with the development of Chipless Radio Frequency Identification (RFID) technology, various single-parameter sensors have gradually moved towards integration, such as strain and encoding, temperature and humidity, and other multi-parameter sensors. However, due to the fixed structure of these multi-parameter sensors, their states cannot be flexibly controlled, and it is difficult to distinguish and locate them when multiple sensors exist simultaneously. In this paper, a novel chipless RFID sensor for multi-parameter sensing is designed. The sensor integrates encoding, humidity, and strain measurements without using a traditional chip-based design. A broadband antenna is also designed to match the operating frequency band of the sensor. This integration of multiple parameters is made possible by the sensor’s unique design and the use of a compatible antenna, which enables the measurement of different physical parameters simultaneously. Furthermore, flexible combinations of the three parameters are achieved through wired or wireless reconfiguration methods, which allow for the sensor’s states to be reconfigured during measurement. As a result, this sensor can achieve multiple states, making it more versatile and efficient in monitoring various parameters. In the future, this approach could be combined with self-powering devices and more advanced wireless modules to achieve long-term state control of sensors in large-scale infrastructure structures, providing a new method for modern building health monitoring applications, from integrated sensor control to sensor differentiation and localization.