26 November 2019 in IEEE Open Journal of the Communications Society
This paper investigates the problem of detection and classification of unmanned aerial vehicles (UAVs) in the presence of wireless interference signals using a passive radio frequency (RF) surveillance system. The system uses a multistage detector to distinguish signals transmitted by a UAV controller from the background noise and interference signals. First, RF signals from any source are detected using a Markov models-based naïve Bayes decision mechanism. When the receiver operates at a signal-to-noise ratio (SNR) of 10 dB, and the threshold, which defines the states of the models, is set at a level 3.5 times the standard deviation of the preprocessed noise data, a detection accuracy of 99.8% with a false alarm rate of 2.8% is achieved. Second, signals from Wi-Fi and Bluetooth emitters, if present, are detected based on the bandwidth and modulation features of the detected RF signal. Once the input signal is identified as a UAV controller signal, it is classified using machine learning (ML) techniques. Fifteen statistical features extracted from the energy transients of the UAV controller signals are fed to neighborhood component analysis (NCA), and the three most significant features are selected. The performance of the NCA and five different ML classifiers are studied for 15 different types of UAV controllers. A classification accuracy of 98.13% is achieved by k-nearest neighbor classifier at 25 dB SNR. Classification performance is also investigated at different SNR levels and for a set of 17 UAV controllers which includes two pairs from the same UAV controller models.
14 July 2021 in IEEE Transactions on Aerospace and Electronic Systems
This article presents a radar cross-section (RCS)-based statistical recognition system for identifying/classifying unmanned aerial vehicles (UAVs) at microwave frequencies. First, the article presents the results of the vertical (VV) and horizontal (HH) polarization RCS measurement of six commercial UAVs at 15 and 25 GHz in a compact range anechoic chamber. The measurement results show that the average RCS of the UAVs depends on shape, size, material composition of the target UAV as well as the azimuth angle, frequency, and polarization of the illuminating radar. Afterward, radar characterization of the target UAVs is achieved by fitting the RCS measurement data to 11 different statistical models. From the model selection analysis, we observe that the lognormal, generalized extreme value, and gamma distributions are most suitable for modeling the RCS of the commercial UAVs while the Gaussian distribution performed relatively poorly. The best UAV radar statistics forms the class conditional probability densities for the proposed UAV statistical recognition system. The performance of the UAV statistical recognition system is evaluated at different signal noise ratio (SNR) with the aid of Monte Carlo analysis. At an SNR of 10 dB, the average classification accuracy of 97.60% or better is achievable.
3 August 2022 in IEEE Sensors Journal
This work investigates the problem of unmanned aerial vehicle (UAV) recognition using their radar cross section (RCS) signature. The RCS of six commercial UAVs is measured at 15 and 25 GHz in an anechoic chamber for both vertical–vertical (VV) polarization and horizontal–horizontal (HH) polarization. The RCS signatures are used to train 15 different recognition algorithms, each belonging to one of three different categories: statistical learning (SL), machine learning (ML), and deep learning (DL). The study shows that, while the average accuracy of all the algorithms increases with the signal-to-noise ratio (SNR), the ML algorithm achieved better accuracy than the SL and DL algorithms. For example, the classification tree ML achieves an accuracy of 98.66% at 3-dB SNR using the 15-GHz VV-polarized RCS test data from the UAVs. We investigate the recognition accuracy using the Monte Carlo analysis with the aid of boxplots, confusion matrices, and classification plots. On average, the accuracy of the classification tree ML model performed better than the other algorithms, followed by Peter Swerling’s statistical models and the discriminant analysis ML model. In general, the accuracy of the ML and SL algorithms outperformed the DL algorithms (Squeezenet, Googlenet, Nasnet, and Resnet 101) considered in the study. Furthermore, the computational time of each algorithm is analyzed. The study concludes that, while the SL algorithms achieved good recognition accuracy, the computational time was relatively long when compared to the ML and DL algorithms. Also, the study shows that the classification tree achieved the fastest average recognition time of about 0.46 ms.
8 March 2022 in IEEE Journal of Radio Frequency Identification
The ubiquity of unmanned aerial vehicles (UAVs) or drones is posing both security and safety risks to the public as UAVs are now used for cybercrimes. To mitigate these risks, it is important to have a system that can detect or identify the presence of an intruding UAV in a restricted environment. In this work, we propose a radio frequency (RF) based UAV detection and identification system by exploiting signals emanating from both the UAV and its flight controller, respectively. While several RF devices (i.e., Bluetooth and WiFi) operate in the same frequency band as UAVs, the proposed framework utilizes a semi-supervised learning approach for the detection of UAV or UAV’s control signals in the presence of other wireless signals such as Bluetooth and WiFi. The semi-supervised learning approach uses stacked denoising autoencoder and local outlier factor algorithms. After the detection of UAV or UAV’s control signals, the signal is decomposed by using Hilbert-Huang transform and wavelet packet transform to extract features from the time-frequency-energy domain of the signal. The extracted feature sets are used to train a three-level hierarchical classifier for identifying the type of signals (i.e., UAV or UAV control signal), UAV models, and flight mode of UAV.
14 November 2019 in arXiv
The knowledge of the radar signature of aerial targets, such as drones, is critical in designing an effective radar detection system. It is a challenging task to measure the radar cross-section (RCS) of small drones. This paper describes a compact-range approach for measuring the RCS of small drones at 15 GHz and 25 GHz. The measurement results show that the average RCS of the three small drones varies with the radar frequency with higher reflections observed around certain directions. Moreover, the results show that for each drone, the RCS at 25 GHz is higher than the RCS at 15 GHz. Besides, information-theoretical based model selection for the RCS data is carried using the Akaike information criterion (AIC). We find that the generalized extreme value distribution is a good fit for modeling the RCS of small drones.