Talha Rahman

Talha Rahman

Auto-generated profile, based on publicly available information

Talha Rahman

Huawei Munich Research Center, Munich, Germany

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 December 2015 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
PBPablo Wilke Berenguer
Pablo Wilke Berenguer
MNMarkus Nolle
Markus Nolle
LMLutz Molle
Lutz Molle
TRTalha Raman
Talha Raman
ANAntonio Napoli
Antonio Napoli
JFJohannes Karl Fischer
Johannes Karl Fischer
We present a linear and nonlinear digital pre-distortion (DPD) tailored to the components of an optical transmitter. The DPD concept uses nonlinear models of the transmitter devices, which are obtained from direct component measurements. While the digital-to-analog converter and driver amplifier are modeled jointly by a Volterra series, the modulator is modeled independently as a Wiener system. This allows for a block-wise compensation of the modulator by a Hammerstein system and a pre-distortion of the electrical components by a second Volterra series. In simulations and extensive experiments, the performance of our approach for nonlinear DPD is compared to an equivalent linear solution as well as to a configuration without any DPD. The experiments were performed using M-ary quadrature-amplitude modulation (M-QAM) formats ranging from 16- to 128-QAM at a symbol rate of 32 GBd. It is shown that the DPD improves the required optical signal-to-noise ratio at a bit error ratio of 2·10 -2 by at least 1.2 dB. Nonlinear DPD outperforms linear DPD by an additional 0.9 and 2.7 dB for higher-order modulation formats such as 64-QAM and 128-QAM, respectively.

19 February 2015 in IEEE Communications Magazine
Verified
Journal Article
Closed access
ANAntonio Napoli
Antonio Napoli
MBMarc Bohn
Marc Bohn
DRDanish Rafique
Danish Rafique
ASAlexandros Stavdas
Alexandros Stavdas
NSNicola Sambo
Nicola Sambo
JGJuan Pedro Fernandez-Palacios Gimenez
Juan Pedro Fernandez-Palacios Gimenez
In this work we detail the strategies adopted in the European research project IDEALIST to overcome the predicted data plane capacity crunch in optical networks. In order for core and metropolitan telecommunication systems to be able to catch up with Internet traffic, which keeps growing exponentially, we exploit the elastic optical networks paradigm for its astounding characteristics: flexible bandwidth allocation and reach tailoring through adaptive line rate, modulation formats, and spectral efficiency. We emphasize the novelties stemming from the flex-grid concept and report on the corresponding proposed target network scenarios. Fundamental building blocks, like the bandwidth-variable transponder and complementary node architectures ushering those systems, are detailed focusing on physical layer, monitoring aspects, and node architecture design.

1 September 2020 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
TWTom Wettlin
Tom Wettlin
SCStefano Calabrò
Stefano Calabrò
TRTalha Rahman
Talha Rahman
Jinlong WeiJinlong Wei
Jinlong Wei
NSNebojsa Stojanovic
Nebojsa Stojanovic
Stephan PachnickeStephan Pachnicke
Stephan Pachnicke
Intensity modulation and direct detection (IM/DD) together with pulse amplitude modulation (PAM) is a cost-efficient solution for intra-datacenter links. However, sophisticated digital signal processing (DSP) is inevitable to reach the demanded high data rates for these short-reach applications. In this paper, we compare different DSP schemes that enable rates of 200 Gb/s/ and beyond. Those schemes include Tomlinson-Harashima precoding, partial response signaling, Viterbi equalization and post-filtering together with Volterra nonlinear equalization. Extensive experimental measurements are shown in which the DSP approaches are compared at gross rates between 180 Gb/s and 300 Gb/s. The experiments are done in C-band for fiber links of up to 2 km length. As modulation formats, PAM4, PAM6 and PAM8 are considered. Net bit rates well over 200 Gb/s are shown for all formats at a range of 1 km single mode fiber using a transmission system consisting of currently available commercial components. The optimum DSP configuration as well as the best modulation format varies along the investigated data rates. The best solution is shown to change from partial response PAM4 for lower rates to PAM6 and PAM8 at high bit rates.

12 November 2013 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
TRTalha Rahman
Talha Rahman
ANAntonio Napoli
Antonio Napoli
DRDanish Rafique
Danish Rafique
BSBernhard Spinnler
Bernhard Spinnler
MKMaxim Kuschnerov
Maxim Kuschnerov
HWHuug de Waardt
Huug de Waardt
Wavelength selective switches (WSSs) that are integrated in reconfigurable optical add-drop multiplexers (ROADMs) induce penalties on the optical signal due to tight optical filtering, which increases as several ROADMs are cascaded in a meshed network. In this letter, we propose and analyze possible configurations for the mitigation of these penalties in optical domain using optical wave shaper (WS). Including one WS in every ROADM node allows transmission of 28 and 32 GBd signals, which are QPSK, 8-QAM, or 16-QAM modulated, through a cascade of 32 and 14 WSS filters, respectively. With an average bandwidth of 33 GHz per WSS, an optical signal to noise ratio penalty below 1 dB at BER=1×10-3 is observed.

29 February 2016 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
ANAntonio Napoli
Antonio Napoli
MMMahdi M. Mezghanni
Mahdi M. Mezghanni
TRTalha Rahman
Talha Rahman
DRDanish Rafique
Danish Rafique
RPRobert Palmer
Robert Palmer
MBMarc Bohn
Marc Bohn
In this paper, we present a novel digital preemphasis algorithm to compensate for the electrical bandwidth limitations at the transceiver also by taking into account the quantization noise introduced by the signal digitalization. The proposed method is based on the minimization of the mean square error between the desired input signals and the output signals of the digital-to-analog converter/analog-to-digital converter (DAC/ADC), when assuming the knowledge of the DAC/ADC frequency responses. Though this paper focuses on the DAC/ADC compensation, the introduced method could be applied to electrical bandwidth limitations caused by any other component within the transponder. The performance of the algorithm is assessed in optical back-to-back configuration by comparing it against the case without digital preemphasis and with a previously published method to compensate for DAC bandwidth limitations. Our analysis shows that when utilizing realistic descriptions of the DAC/ADC, the proposed digital preemphasis (at the transmitter) or digital compensation (at the transmitter and receiver) can considerably increase the maximum transmittable symbol rate for the case of advanced modulation formats. For example, the maximum symbol rate can be ideally increased up to ~ 60% for the case of 16QAM when employing the high-speed DAC with a -3 dB electrical bandwidth of ~ 16 GHz and with six effective number of bits. Furthermore, we evaluate the impact of additional noise sources, based on experimental measurements, envisioning potential for further improvements of the digital preemphasis module. Finally, we experimentally verified our algorithm, for the specific case of polarization-multiplexed 16QAM, showing a considerable match between simulation and lab results.

24 November 2016 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
GKGinni Khanna
Ginni Khanna
TRTalha Rahman
Talha Rahman
EMErik De Man
Erik De Man
EREmilio Riccardi
Emilio Riccardi
APAnnachiara Pagano
Annachiara Pagano
ANAntonio Napoli
Antonio Napoli
We report on the results of a field trial carried out on a Telecom Italia metro link, targeting short data center interconnect applications. The test-bed presented realistic transmission conditions, such as an average ~0.3-dB/km attenuation and usage of legacy erbium-doped fiber amplifier (EDFA) only. We transmitted a net bit rate of 400 Gb/s on a single carrier with 64 quadrature amplitude modulation (QAM) and 128QAM over 156 km. Error-free transmission over 80 km for single carrier dense wavelength-division multiplexing (DWDM) 30 × 400G 64QAM and 30 × 400G 128QAM (one half of the C-band) is reported. The net spectral efficiency, for both schemes, is 7.11 b/s/Hz.