24 October 2017 in Nanoscale
Optical control of memristors opens the route to new applications in optoelectronic switching and neuromorphic computing. Motivated by the need for reversible and latched optical switching we report on the development of a memristor with electronic properties tunable and switchable by wavelength and polarization specific light. The device consists of an optically active azobenzene polymer, poly(disperse red 1 acrylate), overlaying a forest of vertically aligned ZnO nanorods. Illumination induces trans–cis isomerization of the azobenzene molecules, which expands or contracts the polymer layer and alters the resistance of the off/on states, their ratio and retention time. The reversible optical effect enables dynamic control of a memristor's learning properties including control of synaptic potentiation and depression, optical switching between short-term and long-term memory and optical modulation of the synaptic efficacy via spike timing dependent plasticity. The work opens the route to the dynamic patterning of memristor networks both spatially and temporally by light, thus allowing the development of new optically reconfigurable neural networks and adaptive electronic circuits.
1 November 2019 in Carbon
5 August 2019 in Journal of the American Chemical Society
6 March 2023 in ACS Applied Polymer Materials
28 May 2019 in Advanced Electronic Materials
An optical memristor where the electrical resistance memory depends on the history of both the current flowing through the device and the irradiance of incident light onto it is demonstrated. It is based on a nanocomposite consisting of functionalized gold nanoparticles in an optically active azobenzene polymer matrix. The composite has an extremely low percolation threshold of 0.04% by volume for conductivity because of the aggregation of the conducting nanoparticles into filamentary nanochannels. Optical irradiation results in photomechanical switching through expansion of the thin film from above to below the percolation threshold, giving a large LOW/HIGH resistance ratio of 103. The device acts as an artificial synapse, the conductivity or plasticity of which can be independently modulated, either electrically or optically, to enable tunable and reconfigurable synaptic circuits for brain‐inspired artificial intelligent or visual memory arrays. The lifetime of the resistive‐memory states is also optically controllable, which enables spatial modulation of long‐ and short‐term memory.
25 November 2022 in ACS Applied Nano Materials
We report on the development of hybrid organic-inorganic material-based flexible memristor devices made by a fast and simple electrochemical fabrication method. The devices consist of a bilayer of poly(methyl methacrylate) (PMMA) and Te-rich GeSbTe chalcogenide nanoscale thin films sandwiched between Ag top and TiN bottom electrodes on both Si and flexible polyimide substrates. These hybrid memristors require no electroforming process and exhibit reliable and reproducible bipolar resistive switching at low switching voltages under both flat and bending conditions. Multistate switching behavior can also be achieved by controlling the compliance current (CC). We attribute the switching between the high resistance state (HRS) and low resistance state (LRS) in the devices to the formation and rupture of conductive Ag filaments within the hybrid PMMA/GeSbTe matrix. This work provides a promising route to fabricate flexible memory devices through an electrodeposition process for application in flexible electronics.