A platform is introduced for fabrication of a reusable and highly efficient low band gap photocatalyst by confining gold nanoparticles (AuNPs) in the pores of a nanopatterned Si monolith (AuNSM). Due to their size, a maximum of two AuNPs can assemble in a single pore, thus preventing agglomerations. Their access to the analyte provides more active sites for redox reaction, leading to enhanced efficiency. While proximity of nanoparticles enhances coupling efficiency, confinement prevents rapid recombination of photogenerated charge carriers, a major factor contributing to low efficiency of photocatalytic materials. Degradation of methyl orange (MO) is used to determine the photocatalytic efficacy of AuNSM compared to 1) bare silicon and 2) AuNPs randomly dispersed on silicon. After 90 min of exposure to UV light (λ = 353 nm) in the AuNSM, the MO absorption is <1%, indicating near complete degradation, while it is still 85% and 70% for systems (1) and (2), respectively. Finite element method simulations of the confined structure suggest that the AuNPs act as a mediator/receptacle for photogenerated charges rather than a source of them at this wavelength and thus enhance the performance of the photocatalyst by creating more effective Schottky junctions—preventing recombination of electrons and holes—rather than by a localized surface plasmonic resonance effect.
Plasmonic metasurfaces have important applications in life science, optics, and catalysis. However, their industrial usage is limited by the challenges of high throughput nanofabrication. A promising solution is the transfer of a pattern into a substrate using block copolymers, nanostructured stamps or molds to create binary, three dimensional templates, which can then be decorated with plasmonically active metals. Here, we report on the optical properties of quasi-Babinet complementary arrays in the non-retarded regime investigated by finite-difference time-domain simulations. The structures consist of a nanopillar support, which is covered with metal disks on top of the pillars and a quasi-Babinet complementary hole array film at the base of the pillars. Strong vertical plasmonic coupling occurs for small separation distances of the plasmonic slabs. We present a comprehensive study of the near and far-field properties of such vertically coupled plasmonic arrays varying their critical geometric dimension and the employed metals with their intrinsic plasmonic material properties. In particular, we consider gold, silver, copper, aluminum, nickel, and palladium. Furthermore, the effect of the refractive index n of the nanopillar support between the range of n = 1.4 to n = 3.4 is investigated. The plasmonic slabs show tunable extraordinary transmission and large electric near-field enhancements, which are strongly dependent on the employed material and geometry. Further, we show that the templates are suitable for plasmonic heterostructures commonly used in plasmon-enhanced photocatalysis.
Polaritons are generated by strong interaction between photons and matter, with the hybridization fundamentally changing the energy landscape of the system. Future exploitation of polaritons will benefit from implementing low‐cost, flexible, and easily tuneable configurations, as electronics have before. Here, coherent coupling of the carbonyl stretch vibrations of polyester (poly(ethylene terephthalate), PET) films to the optical modes of a Fabry–Perot (FP) cavity is presented, in which the FP cavity is directly formed on flexible, free‐standing, and commercially available PET films. For 2‐µm thick PET films, the carbonyl stretch vibration of the PET overlaps with the half‐wavelength FP cavity mode, leading to the coupling of the two modes, a Rabi splitting above 160 cm−1, and associated anticrossing in angular dispersion measurements. The study demonstrates dynamic control of light‐matter interaction strength by modulating film thickness under tension, finding that a 25% tensile stretch can tune the light‐matter interaction from 20:80 mixing to near‐perfect 50:50 hybridization at normal incidence. These findings are discussed in the context of future foldable/twistable/wearable polaritonic devices.
1 March 2021 in ECS Journal of Solid State Science and Technology
Plasmonic bilayers fabricated by depositing metal on nanopillar or nanocavity arrays are an effective solution for the industrial scale production of plasmonic templates. Such structures commonly consist of a disk array and a quasi-Babinet complementary perforated film comprised of holes, which are displaced vertically by the pillar or cavity. Simultaneously, the continuous perforated film provides an electrically conductive network, which can be used as a working electrode. In this perspective, we briefly review the nanofabrication of plasmonic bilayer templates and their usage for applications in life science. We discuss quasi-Babinet complementary plasmonic templates as a potential platform to study membrane proteins through spectro-electrochemical investigations.