30 October 2020 in Eastern-European Journal of Enterprise Technologies
One of the urgent problems in the dairy industry is to reduce power input in the process of dispersing milk fat while ensuring a high degree of homogenization. This problem can be solved through the development and implementation of a virtually unexplored jet-slot milk homogenizer. The principle of its action implies the preliminary separation of cream from whole milk and its feed into the high-velocity flow of skim milk. The homogenization process occurs by creating a sufficient difference in velocities of the disperse and dispersing phases of the milk emulsion, which is mathematically described by Weber's criterion.Experimental studies of the effect of fat content in cream, cream feed rate, and width of the annular slot on dispersion indices during processing in the designed homogenizer have been carried out. The mathematical dependence which relates these parameters was found. It was proved that to obtain a milk emulsion with a dispersion level of 0.8 μm, the width of the annular slot should be 0.1–0.5 mm, fat content in cream 40–50 %, and the feed rate less than 40 m/s. The results of the evaluation of dispersion quality show a 7 % decrease in the average diameter of the fat globules compared to the most common values obtainable in the valve homogenizer. A refined critical value of the Weber criterion for dispersion of the fat phase of milk was determined (29 units) which indicates an increase in the intensity of the homogenization process in comparison with the jet milk homogenizer with a separate cream feed. The derived critical value of the criterion is necessary to create a theory of the process of dispersing milk fat and develop more efficient designs of milk homogenizers
30 November 2016 in EUREKA: Life Sciences
The one of the ways of solving question of high-quality cleaning of vegetables is the use of combined methods of cleaning, their study and creation of equipment. The improvement of process for its realization and equipment support at trade enterprises, restaurant economy and mini-factories is a topical task. The expedience of elaboration and introduction of combined processes and equipment for their realization at institutions of the restaurant economy and vegetable-processing enterprises give a possibility to exclude the additional equipment for calibration, sorting, washing, additional cleaning. It, in its turn, will provide the safety at production, favoring the more rational use of resources.The one of most prospective directions of intensification of process of cleaning of the vegetable raw material is an elaboration of combined methods and new specialized apparatuses, which work principle is based on combination of the processes of cleaning of product.The experimental setting was elaborated with correspondent methodology that allows carry out the study of process of cleaning of onion with possible determination of influence of all its parameters on the percent of the raw material losses and effectiveness of product cleaning. It is provided due to the presence of work drum in experimental setting that rotates around its axis. The rotation frequency can be changed within the necessary diapason. The work drum has on its surface the special orifices for cutting off the inedible part of onion. The experimental setting also includes tensometric module that allows determine the effort of separation of peel from onion.The use of apparatus for cleaning of onion will give a possibility to intensify process, to improve the quality of cleaning, to decrease the percent of raw material losses.
30 September 2020 in EUREKA: Life Sciences
The competitiveness improvement of milk products is directly connected with a problem of decreasing energy consumption of the process of milk emulsion dispersion. At creating promising types of energy effective dispersers, a necessary condition is to elaborate a correct methodology for studying them that takes into account the specificity of the process of fat milk microemulsion dispersion. Based on the critical analysis of research methods for homogenizers of different types, there have been determined main directions of their improvement, taken into account in the elaborated research method for a promising jet-slot type milk homogenizer. The method of theoretical studies, including a choice and analysis of stable and changeable factors of the homogenization process in a jet-slot type homogenizer and optimization criteria, has been elaborated. The interconnection of technological, constructive, hydraulic parameters with a dispersion quality has been demonstrated. The influence of physical-mechanical properties of milk as a research object was taken into account. An optimal milk temperature was chosen for the studies. Factor variation limits have been substantiated. The constructive scheme of a chamber for the experimental homogenizer has been developed. At processing the experimental research methodology, the main stage was to develop an experimental set for studying the influence of changeable factors of the dispersion process on a homogenization quality. Dispersion quality estimation methods have been analyzed and the method of microphotography has been chosen with further computed analysis of obtained data. The elaborated methodology was used at studying the influence of cream fat and ring slot width on a dispersion quality in a jet-slot type homogenizer. The obtained data allow to determine rational parameters of cream fat – 40–50 % and slot width – 0.1 mm. The analysis of dispersed characteristics of the milk emulsion allows to make a conclusion about the high homogenization quality, comparing with processing in a valve homogenizer
31 July 2020 in EUREKA: Life Sciences
The aim of the work is to study the process of membrane concentration of cottage cheese whey, using the bubbling method for decreasing polarization layer formation at the UF-membrane surface. A description of the experimental set and processing method for research results of using the method of fighting against a polarization layer in the process of membrane concentration of protein-carbohydrate milk raw materials are presented. Results of the experimental studies as to using the bubbling method for decreasing polarization layer formation in the process of membrane concentration of cottage cheese whey and its influence on concentration membranes productivity are given. Mathematical models, based on regression equations of factorial experiment with using the method of bubbling separated liquid above the membrane surface for choosing technological parameters of process of membrane concentration of cottage cheese whey, have been constructed. Graphic dependencies of the productivity of ultrafiltration polymer membranes of PAN type depending on initial pressure and temperature parameters of the process of membrane concentration are presented. Rational parameters of membrane concentration of cottage cheese whey using the method of bubbling initial raw materials by gas bubbles, directly close to the concentration membrane surface have been determined. Such parameters are: pressure – 0.4...0.5 МPа, temperature of skimmed milk – 40...50 ºС, skimmed milk bubbling frequency – 0.10...0.15 min-1, bubbling pressure must be 0.56...0.58 МPа. The expedience of using the new-method of gel-layer elimination has been established according to research results