4 November 2020 in IEEJ Transactions on Electrical and Electronic Engineering
Large‐volume pulsed discharge plasmas have been studied to gain insight on their phenomena and to realize their applications in various areas, such as sterilization, water treatment, and cancer treatment. Since 2000, when a review paper titled ‘Streamer Discharges in Liquids and their Application’ was published, a number of related papers have been reported in the literature; these reports are summarized in this review paper. Four types of pulsed power‐generated large‐volume discharges in contact with water are presented as representative examples. The discharges are reviewed from the perspectives of the physical and chemical phenomena, as follows: the initiation of filamentary and bush‐like streamers in water; the propagation and extinction of streamer discharge plasmas; the production, behavior, and collapse of bubbles; the measurement of temperature, density, electric field, shock wave, and radicals; the wide discharge on the water surface. Finally, the applications of these large‐volume discharge plasmas are described. © 2020 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC.
24 April 2008 in Electrical Engineering in Japan
Underwater pulsed streamer discharges using a wire-to-cylinder electrode contained in a 42-mm-diameter glass tube were investigated with respect to its spatial spread associated with voltage waveforms. A discharge reactor with a continuous flow system was employed to sterilize E. coli suspended in saline water (10 mS/m). The discharge electrode consisted of a 0.1-mm-diameter metal wire for the high voltage and a mesh cylinder for the ground electrode. Tens of disk-shaped discharges emerged from the wire electrode and propagated toward the cylinder as long as the voltage lasted. The spatial expanse of the discharge was proportional to the cube of the pulse duration and to the amplitude of the voltage. The sterilization experiment showed that the survival ratio of bacteria over discharges was proportional to the average number of the exposures to the discharges while in the reactor. The minimum ratio of surviving bacteria was only 15% under 130 exposures, which corresponds to an energy expenditure of 35 J/ml. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 1–7, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/eej.20554
1 January 2005 in IEEJ Transactions on Fundamentals and Materials
1 January 2013 in IEEJ Transactions on Fundamentals and Materials
1 January 1998 in IEEJ Transactions on Fundamentals and Materials