Pavlo Stashuk

Pavlo Stashuk

Auto-generated profile, based on publicly available information

Pavlo Stashuk

State Enterprise «National Institute for Development Infrastructure» (SE «NIDI»), Kyiv, Ukraine

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 April 2026 in Dorogi i Mosti
Verified
Journal Article
Closed access
BZBohdan Zelenskyi
Bohdan Zelenskyi
MBMaksym Borysenko
Maksym Borysenko
PSPavlo Stashuk
Pavlo Stashuk
SZSerhii Zavhorodnii
Serhii Zavhorodnii
VKVolodymyr Kaskiv
Volodymyr Kaskiv
Introduction. The article considers the fundamental problem of ensuring the durability of highway bridges under aggressive chloride action. The operational reliability of transport structures is largely determined by the condition of reinforced concrete structures exposed to de-icing agents and cyclic wetting. Problem Statement. Chloride-induced corrosion of reinforcement is one of the most dangerous degradation factors, leading to a loss of load-bearing capacity and premature failure of bridges. The existing regulatory framework of Ukraine only partially accounts for these processes, necessitating harmonization with international standards. Objective. The objective of this work is to systematize theoretical knowledge regarding chloride mass transport mechanisms, analyze the influence of mineral admixtures and carbonation on corrosion resistance, and review modern regulatory methods for determining chloride content to improve the national bridge monitoring system. Materials and Methods. Methods of analytical review of scientific literature and regulatory documents regarding diffusion processes, thermodynamic modeling of chloride binding, and probabilistic risk assessment methods were used. Results. The differences between free and bound forms of chlorides are analyzed, and the effect of carbonation on the release of bound salts is examined. Regulatory methodologies for determining water- and acid-soluble chlorides, their advantages, and limitations are described in detail. The necessity of transitioning from deterministic threshold values to probabilistic models of corrosion risk assessment is substantiated. Conclusions. The results demonstrate effective durability prediction of transport structures requires differentiated consideration of free and bound chlorides, especially for concretes with mineral admixtures and under carbonation conditions. The feasibility of implementing ASTM C876 and AASHTO T 260 methodologies into domestic bridge monitoring practice is substantiated. The proposed approach allows for the identification of corrosion processes at the initiation stage, which is a prerequisite for introducing asset management systems based on actual technical condition.

24 October 2025 in Dorogi i Mosti
Verified
Journal Article
Closed access
AMAnna Miniukova
Anna Miniukova
PSPavlo Stashuk
Pavlo Stashuk
Introduction. Many bridge structures worldwide were designed in accordance with outdated standards and no longer meet the demands of modern transport loads. This creates a global safety issue, making the development of effective solutions for their strengthening a critically important task. Problem Statement. he vast majority of the global bridge infrastructure, particularly in developing countries, was constructed in the mid-20th century. The design of these structures was based on the normative loads of that time, which were significantly lower than current ones. Today, the increase in traffic intensity and the emergence of oversized and heavy-duty vehicles lead to bridge overloading. This causes premature physical wear of the structures, the appearance of cracks, a reduction in their load-bearing capacity, and, consequently, poses a safety threat to all road users. Materials and methods. The methodology of this study is based on a comprehensive approach that combines theoretical analysis, mathematical modeling, and numerical calculations. The purpose of using these selected methods is to substantiate the need for strengthening existing reinforced concrete bridge structures and to prove the effectiveness of external prestressed reinforcement compared to traditional solutions. The research is based on the Finite Element Method (FEM). This numerical method allows for approximating the behavior of a complex structure by dividing it into a set of simple elements (finite elements). This makes it possible to accurately determine the stress-strain state of the entire object. The calculations were performed using the licensed software package LIRA-SAPR, a modern tool for modeling, analyzing, and designing building structures. Objective. To assess the effectiveness of external prestressed reinforcement in improving the durability of reinforced concrete bridge structures based on experimental data. Results. The analysis confirmed that the existing structures have a significant strength deficit: the calculated bending moment from modern loads (184 tm) exceeds the load-bearing capacity of the existing beams (141 tm). It was found that both strengthening methods—with ordinary and prestressed reinforcement—effectively increase the load-bearing capacity of the structures, bringing it up to 193 tm and 215 tm, respectively. The use of external prestressing significantly improved the operational characteristics of the structure. The calculated deflection from self-weight decreased from 21.3 mm to 14.1 mm, and the compressive stresses in the concrete eliminated the risk of crack formation.

29 May 2026 in Bridges and tunnels: Theory, Research, Practice
Verified
Journal Article
Open access
AMA. D. Miniukova
A. D. Miniukova
PSP. M. Stashuk
P. M. Stashuk
Purpose. The purpose of the study is to establish a quantitative relationship between the span length of existing reinforced concrete bridge girders (typical beams of type 56, designed for N-30 load) and the relative efficiency of reinforcement with external prestressed reinforcement. The ultimate goal is to ensure safe operation under modern load classes AK-15/NK-100. Methodology. An analysis of the lining stress-strain state for typical beams type 56 span lengths: 11.36 m, 16.76 m and 22.16 m. Beam models were built based on real geometric dimensions using professional calculation software LIRA SAPR. This approach made it possible to simulate the spatial behavior of the structure and to account for the actual boundary conditions and applied loads. Calculations were performed for beams with different span lengths. To ensure the load-bearing capacity of the standard beam type commonly used in existing highway bridges in Ukraine under modern traffic loads, the required additional area of reinforcement was determined using the corresponding design formula. Findings. The numerical analysis confirmed that the application of external pre-stressed reinforcement ensures the necessary bearing capacity for all span structures. It was established that although the absolute increase in bearing capacity significantly grows with the increase in span length, the relative efficiency of strengthening substantially decreases simultaneously: the rate of increase in the reinforcement effect slows down on longer beams. Originality. The originality of the study consists of the obtained results of numerical analysis that established and quantified the functional dependence between span length and the relative efficiency of External Pre-Stressed Reinforcement, and introduced the novel criteria for structural diagnosis. Practical value. The study provides a scientifically verified engineering algorithm for the mass modernization of typical bridge beams, ensuring a cost-effective path to restoring safety, durability, and compliance with the AK-15 load standard.

23 October 2026 in Dorogi i Mosti
Verified
Journal Article
Closed access
BZBohdan Zelenskyi
Bohdan Zelenskyi
MBMaksym Borysenko
Maksym Borysenko
OMOleksandr Melnychenko
Oleksandr Melnychenko
PSPavlo Stashuk
Pavlo Stashuk
SZSerhii Zavhorodnii
Serhii Zavhorodnii
Chloride-induced reinforcement corrosion is a major cause of premature deterioration of reinforced concrete bridge elements exposed to cyclic wetting and de-icing agents. Visual inspection mainly records the propagation stage, whereas water-soluble chloride testing can identify hazardous conditions before widespread cracking and spalling. Chloride content, however, cannot by itself define the operational condition without considering reinforcement depth, moisture, cracking and electrochemical evidence. To generalize field measurements of water-soluble chlorides in six transportation structures in Kyiv, evaluate spatial variability and develop a practical diagnostic workflow. The study covered a bridge over the Lybid River and five overpasses near Poliarna Street, Portova Street and the Osokorky, Nyvky and Chernihivska metro stations. Visual inspection, core or local sampling, layer preparation and silver nitrate titration were used. After removing duplicate and missing records, 103 determinations expressed as percent of estimated cement mass were analyzed. Water-soluble chloride content ranged from 0.01 to 2.00 %, with a median of 0.55 %. Under the adopted limits for non-prestressed reinforcement, 23 results fell within the common range for conditions 1–3, 36 within condition 4, and 44 within condition 5; the corresponding counts for prestressed reinforcement were 19, 13, and 71. Thirty paired surface/deeper measurements confirmed a non-uniform chloride profile. Results should be interpreted using assessment levels corresponding to operational conditions 1–5, with separate limits for prestressed and non-prestressed reinforcement and samples taken at two levels. Chloride content alone does not distinguish conditions 1–3; the final condition requires visual, electrochemical, and structural evidence.

4 June 2025 in Dorogi i Mosti
Verified
Journal Article
Closed access
AMAnna Miniukova
Anna Miniukova
PSPavlo Stashuk
Pavlo Stashuk
His study explores the effectiveness of external prestressed reinforcement as a method for enhancing the durability of reinforced concrete bridge structures. Over time, many bridges experience significant deterioration due to increased traffic loads, aging materials, and environmental factors, leading to reduced load-bearing capacity. External prestressed reinforcement offers a solution to extend the service life of bridges without full reconstruction. The research demonstrates that this method improves the structural rigidity of the bridge, redistributes loads more evenly, and reduces deformations, contributing to the overall longevity and reliability of the structure. Experimental data indicates that external prestressed reinforcement enhances crack resistance, increases bridge stiffness, and ensures the stability of anchor blocks. By applying this technique, it is possible to increase the load capacity of a bridge without the need for costly capital repairs. The findings suggest that this approach is an effective and economical solution for strengthening and maintaining bridges, particularly those built in previous decades, and that ongoing monitoring and quality control are crucial for optimizing its application. Introduction. Reinforced concrete bridge structures experience significant loads during operation, leading to physical deterioration, crack formation, and a gradual decrease in load-bearing capacity. One method for extending the service life of bridges without full reconstruction is the use of external prestressed reinforcement. This method enhances the rigidity of the structure and ensures a more uniform distribution of loads, minimizing deformations.

1 January 2025 in The National Transport University Bulletin
Verified
Journal Article
Closed access
MAMinyukova A.D.
Minyukova A.D.
SPStashuk P.M.
Stashuk P.M.