1 February 2018 in Polymer Testing
1 January 2015 in Journal of Engineering Materials and Technology
High damping rubber (HDR) is used in HDR bearings (HDRBs) which are dissipating devices in structural systems. These devices actually have to support permanent static load in compression and potential cyclic shear when earthquakes occur. Mastering the behavior of bearings implies an accurate understanding of HDR response in such configuration. The behavior of HDR is, however, complex due to the nonlinearity and time dependance of stress–strain response and especially Mullins effect. To the authors' knowledge, tests on HDR under combined quasi-static compression and cyclic shear (QC-CS) have not been performed with regard to Mullins effect yet. The purpose of this study is thus to assess experimentally Mullins effect in HDR, especially under QC-CS. In order to achieve this aim, cyclic tensile and compression tests were first carried out to confirm the occurrence of Mullins effect in the considered HDR. Then, an original biaxial setup allowing testing HDR specimen under QC-CS was developed. This setup enables us to identify Mullins effect of the considered HDR under this kind of loading. Tests carried out with this setup were thus widened to the study of the influence of compression stress on shear response under this loading, especially in terms of shear modulus and density of energy dissipation.
1 July 2026 in e-Journal of Nondestructive Testing
Degraded performance of isolation bearings could have dramatic consequences for the safety and durability of civil engineering structures. It is therefore necessary to monitor the bearings in place. In situ measurement of the aging of rubber-like materials remains a challenge to date. A simple hardness measurement does not enable the evolution of viscoelastic properties to be assessed. Ultrasonic transmission measurements are also very difficult to perform due to the highly attenuating nature of these materials. The ultrasonic surface reflection method (SRM) overcomes the problem of wave attenuation by the medium. Chloroprene rubber (CR) samples were exposed to accelerated aging at a range of temperatures, from one day to 46 days. For each temperature and aging time, the quasi-static Young's modulus was measured using a conventional tensile test and the shear modulus at 2 MHz was determined using the SRM. A monotonic relationship between these quantities has been demonstrated, thus showing the feasibility of in situ monitoring of the aging of bearing devices using the SRM.
20 October 2022 in Materialia