1 February 2022 in International Journal of Impact Engineering
4 June 2022 in Composite Structures
12 March 2021 in Journal of Reinforced Plastics and Composites
In order to investigate the residual strength of composite overwrapped pressure vessels subjected to impact loads, an extensive experimental study has been performed. The vessels are loaded up to different mechanical work levels (quasi-static) or with various impact energies (dynamic). After loading, the emerged damage in the pressure vessel is examined using computed tomography scans. The tests of vessels up to various energies enable us to visualize the initiation and progressive growth of damage. The overall influence of the damage is subsequently quantified by means of a burst pressure test. Accordingly, the reduction of burst pressure can be used to evaluate the global severity of the observed damage in the computed tomography scan. From the experiments, it is concluded that the first failure mechanisms, that is, delaminations, do not cause a meaningful reduction of the burst pressure. Shear bands, on the other hand, which are formed thereafter, do induce a significant decrease of the residual strength.
19 May 2020 in Journal of Reinforced Plastics and Composites
In order to unravel the damage mechanisms occurring in composite-overwrapped pressure vessels (COPVs) subjected to crash conditions, a combined experimental-numerical study has been performed. For the purpose of generality and simplicity, quasi-static contacts on filament-wound cylinders are considered in this paper, as a precursor for geometrically complex impacts on COPVs. Rings with different wall thicknesses are tested to assess how failure mechanisms change when transitioning from thin-wall to thick-wall cylinders. The experimental results are used to identify, which mechanisms occur, and the numerical model is subsequently exploited to analyze the corresponding mechanisms. Based on the understanding of the mechanisms, a method to improve the damage tolerance of thick cylinders is presented. The rings are locally pre-delaminated during manufacturing to promote the growth of these pre-delaminations instead of the initiation of fiber failure.
1 August 2021 in International Journal of Pressure Vessels and Piping